Initial commit

7 files changed, 4081 insertions, 0 deletions

diff --git a/.config/git/config b/.config/git/config
new file mode 100644
index 0000000..2165746
--- /dev/null
+++ b/.config/git/config
@@ -0,0 +1,11 @@
+[user]
+        email = sebastiano@tronto.net
+        name = Sebastiano Tronto
+[credential]
+        helper = store
+[pull]
+        rebase = false
+[sendemail]
+        smtpserver = /usr/bin/msmtp
+[push]
+        autoSetupRemote = true
diff --git a/.config/isyncrc b/.config/isyncrc
new file mode 100644
index 0000000..44f60bc
--- /dev/null
+++ b/.config/isyncrc
@@ -0,0 +1,18 @@
+IMAPStore mailbox-remote
+Host imap.mailbox.org
+User sebastiano@tronto.net
+PassCmd "cat ~/.ssh/mailbox.org"
+TLSType STARTTLS
+
+MaildirStore mailbox-local
+Path ~/mail/
+Inbox ~/mail/INBOX
+SubFolders Verbatim
+
+Channel mailbox
+Far :mailbox-remote:
+Near :mailbox-local:
+Patterns * !Archives
+Create Both
+Expunge Both
+SyncState *
diff --git a/.config/lynx/lynx.cfg b/.config/lynx/lynx.cfg
new file mode 100644
index 0000000..40841ab
--- /dev/null
+++ b/.config/lynx/lynx.cfg
@@ -0,0 +1,3868 @@
+# $LynxId: lynx.cfg,v 1.358 2024/05/31 22:09:16 tom Exp $
+# lynx.cfg file.
+# The default placement for this file is /etc/lynx.cfg
+#
+# Please don't edit this file directly (it is updated with every Red Hat
+# Linux update, overwriting your changes). Instead, edit /etc/lynx-site.cfg.
+#
+# LYNX_VERSION "2.9.2"
+# LYNX_DATE    "31 May 2024"
+#
+# Definition pairs (configuration settings) are of the form
+#       VARIABLE:DEFINITION
+# NO spaces are allowed around the colon ":" between the pair items.
+#
+#  If you do not have write access to /usr/local/lib you may change
+#  the default location of this file in the userdefs.h file and recompile,
+#  or specify its location on the command line with the "-cfg"
+#  command line option.
+#
+# Items may be commented out by putting a '#' as the FIRST char of the line
+# (Any line beginning with punctuation is ignored).  Leading blanks on each
+# line are ignored; trailing blanks may be significant depending on the option.
+
+# In most cases, a definition can be overridden by another later in the
+# file, or in an including configuration file.  You can see the effect of
+# definitions (and redefinitions) in the trace file Lynx.log by using the
+# "-trace" and "-trace-mask" options, e.g.,
+#       lynx -trace -trace-mask=8
+
+# As a documentation aid, the default values for each setting are shown
+# commented-out.  By convention, these default value comments have no space
+# after the "#", e.g.,
+#       #HTTP_PROTOCOL:1.0
+
+# An HTML'ized description of all settings (based on comments in this file,
+# with alphabetical table of settings and with table of settings by category)
+# is available at https://lynx.invisible-island.net/release/breakout/lynx_help/cattoc.html
+#
+### The conversion is done via the scripts/cfg2html.pl script.
+### Several directives beginning with '.' are used for this purpose.
+
+.h1 Auxiliary Facilities
+# These settings control the auxiliary navigating facilities of lynx, e.g.,
+# jumpfiles, bookmarks, default URLs.
+
+.h2 INCLUDE
+# Starting with Lynx 2.8.1, the lynx.cfg file has a crude "include"
+# facility.  This means that you can take advantage of the global lynx.cfg
+# while also supplying your own tweaks.
+#
+# You can use a command-line argument (-cfg /where/is/lynx.cfg) or an
+# environment variable (LYNX_CFG=/where/is/lynx.cfg).
+# For instance, put in your .profile or .login:
+#
+#   LYNX_CFG=~/lynx.cfg; export LYNX_CFG   # in .profile for sh/ksh/bash/etc.
+#   setenv LYNX_CFG ~/lynx.cfg             # in .login for [t]csh
+#
+# Then in ~/lynx.cfg:
+#
+#   INCLUDE:/usr/local/lib/lynx.cfg
+#           ^^^^^^^^^^^^^^^^^^^^^^^ or whatever is appropriate on your system
+# and now your own tweaks.  If you omit the directory name, e.g.,
+#
+#   INCLUDE:lynx.cfg
+#
+# then lynx first checks if it is in any of the directories listed in the
+# environment variable LYNX_CFG_PATH, then tries the directory of the default
+# config-file.
+#
+# You can also suppress all but specific settings that will be read from
+# included files.  This allows sysadmins to provide users the ability to
+# customize lynx with options that normally do not affect security, such as
+# COLOR, VIEWER, KEYMAP.
+#
+# The syntax is
+#
+#   INCLUDE:filename for <space-separated-list-of-allowed-settings>
+#
+# sample:
+.ex
+#INCLUDE:~/lynx.cfg for COLOR VIEWER KEYMAP
+# only one space character should surround the word 'for'.  On Unix systems ':'
+# is also accepted as separator.  In that case, the example can be written as
+.ex
+#INCLUDE:~/lynx.cfg:COLOR VIEWER KEYMAP
+# In the example, only the settings COLOR, VIEWER and KEYMAP are accepted by
+# lynx.  Other settings are ignored.  Note:  INCLUDE is also treated as a
+# setting, so to allow an included file to include other files, put INCLUDE in
+# the list of allowed settings.
+#
+# If you allow an included file to include other files, and if a list of
+# allowed settings is specified for that file with the INCLUDE command, nested
+# files are only allowed to include the list of settings that is the set AND of
+# settings allowed for the included file and settings allowed by nested INCLUDE
+# commands.  In short, there is no security hole introduced by including a
+# user-defined configuration file if the original list of allowed settings is
+# secure.
+
+.h2 STARTFILE
+# STARTFILE is the default starting URL if none is specified
+#   on the command line or via a WWW_HOME environment variable;
+#   Lynx will refuse to start without a starting URL of some kind.
+# STARTFILE can be remote, e.g. http://www.w3.org/default.html ,
+#                or local, e.g. file://localhost/PATH_TO/FILENAME ,
+#           where PATH_TO is replaced with the complete path to FILENAME
+#           using Unix shell syntax and including the device on VMS.
+#
+# Normally we expect you will connect to a remote site, e.g., the Lynx starting
+# site:
+STARTFILE:https://sebastiano.tronto.net/
+#
+# As an alternative, you may want to use a local URL.  A good choice for this is
+# the user's home directory:
+.ex
+#STARTFILE:file://localhost/~/
+#
+# Your choice of STARTFILE should reflect your site's needs, and be a URL that
+# you can connect to reliably.  Otherwise users will become confused and think
+# that they cannot run Lynx.
+
+.h2 HELPFILE
+# HELPFILE must be defined as a URL and must have a
+# complete path if local:
+# file://localhost/PATH_TO/lynx_help/lynx_help_main.html
+#   Replace PATH_TO with the path to the lynx_help subdirectory
+#   for this distribution (use SHELL syntax including the device
+#   on VMS systems).
+# The default HELPFILE is:
+.url https://lynx.invisible-island.net/lynx_help/lynx_help_main.html
+#   This should be changed to the local path.
+# This definition will be overridden if the "LYNX_HELPFILE" environment
+# variable has been set.
+#
+HELPFILE:file://localhost/usr/share/doc/lynx/lynx_help/lynx_help_main.html
+.ex
+#HELPFILE:file://localhost/PATH_TO/lynx_help/lynx_help_main.html
+
+.h2 DEFAULT_INDEX_FILE
+# DEFAULT_INDEX_FILE is the default file retrieved when the
+# user presses the 'I' key when viewing any document.
+# An index to your CWIS can be placed here or a document containing
+# pointers to lots of interesting places on the web.
+#
+DEFAULT_INDEX_FILE:http://www.google.com/
+
+.h1 Interaction
+
+.h2 GOTOBUFFER
+# Set GOTOBUFFER to TRUE if you want to have the previous goto URL,
+# if any, offered for reuse or editing when using the 'g'oto command.
+# The default is defined in userdefs.h.  If left FALSE, the circular
+# buffer of previously entered goto URLs can still be invoked via the
+# Up-Arrow or Down-Arrow keys after entering the 'g'oto command.
+#
+#GOTOBUFFER:FALSE
+
+.h2 JUMP_PROMPT
+# JUMP_PROMPT is the default statusline prompt for selecting a jumps file
+# shortcut.  (see below).
+# You can change the prompt here from that defined in userdefs.h.  Any
+# trailing white space will be trimmed, and a single space is added by Lynx
+# following the last non-white character.  You must set the default prompt
+# before setting the default jumps file (below).  If a default jumps file
+# was set via userdefs.h, and you change the prompt here, you must set the
+# default jumps file again (below) for the change to be implemented.
+#
+#JUMP_PROMPT:Jump to (use '?' for list):
+
+.h1 Auxiliary Facilities
+
+.h2 JUMPFILE
+# JUMPFILE is the local file checked for short-cut names for URLs when
+# the user presses the 'j' (JUMP) key.  The file contains an HTML
+# definition list (DL).  The definition titles (DT) are used as
+# short-cut name; the definition data (DD) are URLs.
+#
+# There is an example jumps file in the samples subdirectory.
+#
+# After pressing 'j', the user will be prompted to enter a short-cut
+# name for an URL, which Lynx will then follow in a similar manner to
+# 'g'oto; alternatively, s/he can enter '?' to view the full JUMPFILE
+# list of short-cuts with associated URLs.
+#
+# If the URL contains one or more "%s" markers, Lynx will prompt the user
+# for text to fill in for each marker.  If no text is given, the jump is
+# cancelled.
+#
+# If not defined here or in userdefs.h, the JUMP command will invoke the
+# NO_JUMPFILE statusline message (see LYMessages_en.h ).
+#
+# To allow '?' to work, include in the JUMPFILE
+# a short-cut to the JUMPFILE itself, e.g.
+# <dt>?<dd><a href="file://localhost/path/jumps.html">This Shortcut List</a>
+#
+# On VMS, use Unix SHELL syntax (including a lead slash) to define it.
+#
+# Alternate jumps files can be defined and mapped to keys here.  If the
+# keys have already been mapped, then those mappings will be replaced,
+# but you should leave at least one key mapped to the default jumps
+# file.  You optionally may include a statusline prompt string for the
+# mapping.  You must map upper and lowercase keys separately (beware of
+# mappings to keys which the user can further remap via the 'o'ptions
+# menu).  The format is:
+#
+#       JUMPFILE:path:key[:prompt]
+#
+# where path should begin with a '/' (i.e., not include file://localhost).
+# Any white space following a prompt string will be trimmed, and a single
+# space will be added by Lynx.
+#
+# In the following line, include the actual full local path to JUMPFILE,
+# but do not include 'file://localhost' in the line.
+#JUMPFILE:/FULL_LOCAL_PATH/jumps.html
+.ex
+#JUMPFILE:/Lynx_Dir/ips.html:i:IP or Interest group (? for list):
+
+.h2 JUMPBUFFER
+# Set JUMPBUFFER to TRUE if you want to have the previous jump target,
+# if any, offered for reuse or editing when using the 'J'ump command.
+# The default is defined in userdefs.h.  If left FALSE, the circular
+# buffer of previously entered targets (shortcuts) can still be invoked
+# via the Up-Arrow or Down-Arrow keys after entering the 'J'ump command.
+# If multiple jumps files are installed, the recalls of shortcuts will
+# be specific to each file.  If Lynx was built with PERMIT_GOTO_FROM_JUMP
+# defined, any random URLs used instead of shortcuts will be stored in the
+# goto URL buffer, not in the shortcuts buffer(s), and the single character
+# ':' can be used as a target to invoke the goto URL buffer (as if 'g'oto
+# followed by Up-Arrow had been entered).
+#
+#JUMPBUFFER:FALSE
+
+.h1 Internal Behavior
+
+.h2 SAVE_SPACE
+# If SAVE_SPACE is defined, it will be used as a path prefix for the
+# suggested filename in "Save to Disk" operations from the 'p'rint or
+# 'd'ownload menus.  On VMS, you can use either VMS (e.g., "SYS$LOGIN:")
+# or Unix syntax (including '~' for the HOME directory).  On Unix, you
+# must use Unix syntax.  If the symbol is not defined, or is zero-length
+# (""), no prefix will be used, and only a filename for saving in the
+# current default directory will be suggested.
+# This definition will be overridden if a "LYNX_SAVE_SPACE" environment
+# variable has been set on Unix, or logical has been defined on VMS.
+#
+#SAVE_SPACE:~/foo/
+
+.h2 REUSE_TEMPFILES
+# Lynx uses temporary files for (among other purposes) the content of
+# various user interface pages.  REUSE_TEMPFILES changes the behavior
+# for some of these temp files, among them pages shown for HISTORY,
+# VLINKS, OPTIONS, INFO, PRINT, DOWNLOAD commands.
+# If set to TRUE, the same file can be used multiple times for the same
+# purpose.  If set to FALSE, a new filename is generated each time before
+# rewriting such a page.  With TRUE, repeated invocation of these commands
+# is less likely to push previous documents out of the cache of rendered
+# texts (see also DEFAULT_CACHE_SIZE).  This is especially useful with
+# intermittent (dialup) network connections, when it is desirable to
+# continue browsing through the cached documents after disconnecting.
+# With the default setting of FALSE, there can be more than one incarnation
+# of e.g. the VLINKS page cached in memory (but still only the most recently
+# generated one is kept as a file), resulting in sometimes less surprising
+# behaviour when returning to such a page via HISTORY or PREV_DOC functions
+# (most users will not encounter and notice this difference).
+#
+#REUSE_TEMPFILES:FALSE
+
+.h2 LYNX_HOST_NAME
+# If LYNX_HOST_NAME is defined here or in userdefs.h, it will be
+# treated as an alias for the local host name in checks for URLs on
+# the local host (e.g., when the -localhost switch is set), and this
+# host name, "localhost", and HTHostName (the fully qualified domain
+# name of the system on which Lynx is running) will all be passed as
+# local.  A different definition here will override that in userdefs.h.
+#
+#LYNX_HOST_NAME:www.cc.ukans.edu
+
+.h2 LOCALHOST_ALIAS
+# localhost aliases
+# Any LOCALHOST_ALIAS definitions also will be accepted as local when
+# the -localhost switch is set.  These need not actually be local, i.e.,
+# in contrast to LYNX_HOST_NAME, you can define them to trusted hosts at
+# other Internet sites.
+#
+.ex 2
+#LOCALHOST_ALIAS:gopher.server.domain
+#LOCALHOST_ALIAS:news.server.domain
+
+.h2 LOCAL_DOMAIN
+# LOCAL_DOMAIN is used for a tail match with the ut_host element of
+# the utmp or utmpx structure on systems with utmp capabilities, to
+# determine if a user is local to your campus or organization when
+# handling -restrictions=inside_foo or outside_foo settings for ftp,
+# news, telnet/tn3270 and rlogin URLs.  An "inside" user is assumed
+# if your system does not have utmp capabilities.  CHANGE THIS here
+# if it was not changed in userdefs.h at compilation time.
+#
+#LOCAL_DOMAIN:ukans.edu
+
+.h1 Session support
+
+.h2 AUTO_SESSION
+# If AUTO_SESSION is TRUE lynx will save/restore useful information about
+# your browsing history when closing/starting current lynx session if
+# no command-line session switches override this setting.
+# This setting is useful only if SESSION_FILE is defined here or in the user's
+# .lynxrc file.
+#
+#AUTO_SESSION:FALSE
+
+.h2 SESSION_FILE
+# SESSION_FILE defines the file name where lynx will store user sessions.
+# This setting is used only when AUTO_SESSION is true.
+# Note: the default setting will store/resume each session in a different
+# folder under same file name (if that is allowed by operating system)
+# when lynx is invoked from different directories.
+# (The current working directory may be changed inside lynx)
+#
+# If you want to use the same session file wherever you invoke Lynx,
+# enter the full path below, eg '/home/<username>/.lynx_session'.
+#
+# If you do not want this feature, leave the setting commented.
+# Users can still customize SESSION_FILE and AUTO_SESSION via
+# their .lynxrc file.
+#
+#SESSION_FILE:lynx_session
+
+.h2 SESSION_LIMIT
+# SESSION_LIMIT defines maximum number of:  searched strings, goto URLs,
+# visited links and history entries which will be saved in session file.  The
+# minimum allowed is 1, the maximum is 10000.
+#
+# For instance, if SESSION_LIMIT is 250, a per-session limit of 250 entries of
+# searched strings, goto URLs, visited links and history entries will be saved
+# in the session file.
+#
+# There is no fixed limit on the number of entries which can be restored;
+# It is limited only by available memory.
+#
+#SESSION_LIMIT:250
+
+.h1 Character Sets
+
+.h2 CHARACTER_SET
+# CHARACTER_SET defines the display character set, i.e., assumed to be
+# installed on the user's terminal.  It determines which characters or strings
+# will be used to represent 8-bit character entities within HTML.  New
+# character sets may be defined as explained in the README files of the
+# src/chrtrans directory in the Lynx source code distribution.  For Asian (CJK)
+# character sets, it also determines how Kanji code will be handled.  The
+# default is defined in userdefs.h and can be changed here or via the
+# 'o'ptions menu.  The 'o'ptions menu setting will be stored in the user's RC
+# file whenever those settings are saved, and thereafter will be used as the
+# default.  For Lynx a "character set" has two names:  a MIME name (for
+# recognizing properly labeled charset parameters in HTTP headers etc.), and a
+# human-readable string for the 'O'ptions Menu (so you may find info about
+# language or group of languages besides MIME name).  Not all 'human-readable'
+# names correspond to exactly one valid MIME charset (example is "Chinese");
+# in that case an appropriate valid (and more specific) MIME name should be
+# used where required.  Well-known synonyms are also processed in the code.
+#
+# Raw (CJK) mode
+#
+# Lynx normally translates characters from a document's charset to display
+# charset, using ASSUME_CHARSET value (see below) if the document's charset
+# is not specified explicitly.  Raw (CJK) mode is OFF for this case.
+# When the document charset is specified explicitly, that charset
+# overrides any assumption like ASSUME_CHARSET or raw (CJK) mode.
+#
+# For the Asian (CJK) display character sets, the corresponding charset is
+# assumed in documents, i.e., raw (CJK) mode is ON by default.  In raw CJK
+# mode, 8-bit characters are not reverse translated in relation to the entity
+# conversion arrays, i.e., they are assumed to be appropriate for the display
+# character set.  The mode should be toggled OFF when an Asian (CJK) display
+# character set is selected but the document is not CJK and its charset not
+# specified explicitly.
+#
+# Raw (CJK) mode may be toggled by user via '@' (LYK_RAW_TOGGLE) key,
+# the -raw command line switch or from the 'o'ptions menu.
+#
+# Raw (CJK) mode effectively changes the charset assumption about unlabeled
+# documents.  You can toggle raw mode ON if you believe the document has a
+# charset which does correspond to your Display Character Set.  On the other
+# hand, if you set ASSUME_CHARSET the same as Display Character Set you get raw
+# mode ON by default (but you get assume_charset=iso-8859-1 if you try raw mode
+# OFF after it).
+#
+# Note that "raw" does not mean that every byte will be passed to the screen.
+# HTML character entities may get expanded and translated, inappropriate
+# control characters filtered out, etc.  There is a "Transparent" pseudo
+# character set for more "rawness".
+#
+# Since Lynx now supports a wide range of platforms it may be useful to note
+# the cpXXX codepages used by IBM PC compatible computers, and windows-xxxx
+# used by native MS-Windows apps.  We also note that cpXXX pages rarely are
+# found on Internet, but are mostly for local needs on DOS.
+#
+# Recognized character sets include:
+#
+.nf
+#    string for 'O'ptions Menu          MIME name
+#    ===========================        =========
+#    7 bit approximations (US-ASCII)    us-ascii
+#    Western (ISO-8859-1)               iso-8859-1
+#    Western (ISO-8859-15)              iso-8859-15
+#    Western (cp850)                    cp850
+#    Western (windows-1252)             windows-1252
+#    IBM PC US codepage (cp437)         cp437
+#    DEC Multinational                  dec-mcs
+#    Macintosh (8 bit)                  macintosh
+#    NeXT character set                 next
+#    HP Roman8                          hp-roman8
+#    Chinese                            euc-cn
+#    Japanese (EUC-JP)                  euc-jp
+#    Japanese (Shift_JIS)               shift_jis
+#    Korean                             euc-kr
+#    Taipei (Big5)                      big5
+#    Vietnamese (VISCII)                viscii
+#    Eastern European (ISO-8859-2)      iso-8859-2
+#    Eastern European (cp852)           cp852
+#    Eastern European (windows-1250)    windows-1250
+#    Latin 3 (ISO-8859-3)               iso-8859-3
+#    Latin 4 (ISO-8859-4)               iso-8859-4
+#    Baltic Rim (ISO-8859-13)           iso-8859-13
+#    Baltic Rim (cp775)                 cp775
+#    Baltic Rim (windows-1257)          windows-1257
+#    Celtic (ISO-8859-14)               iso-8859-14
+#    Cyrillic (ISO-8859-5)              iso-8859-5
+#    Cyrillic (cp866)                   cp866
+#    Cyrillic (windows-1251)            windows-1251
+#    Cyrillic (KOI8-R)                  koi8-r
+#    Arabic (ISO-8859-6)                iso-8859-6
+#    Arabic (cp864)                     cp864
+#    Arabic (windows-1256)              windows-1256
+#    Greek (ISO-8859-7)                 iso-8859-7
+#    Greek (cp737)                      cp737
+#    Greek2 (cp869)                     cp869
+#    Greek (windows-1253)               windows-1253
+#    Hebrew (ISO-8859-8)                iso-8859-8
+#    Hebrew (cp862)                     cp862
+#    Hebrew (windows-1255)              windows-1255
+#    Turkish (ISO-8859-9)               iso-8859-9
+#    North European (ISO-8859-10)       iso-8859-10
+#    Ukrainian Cyrillic (cp866u)        cp866u
+#    Ukrainian Cyrillic (KOI8-U)        koi8-u
+#    UNICODE (UTF-8)                    utf-8
+#    RFC 1345 w/o Intro                 mnemonic+ascii+0
+#    RFC 1345 Mnemonic                  mnemonic
+#    Transparent                        x-transparent
+.fi
+#
+# The value should be the MIME name of a character set recognized by
+# Lynx (case insensitive).
+# Find RFC 1345 at
+.url http://tools.ietf.org/html/rfc1345
+#
+CHARACTER_SET:utf-8
+
+.h2 LOCALE_CHARSET
+# LOCALE_CHARSET overrides CHARACTER_SET if true, using the current locale to
+# lookup a MIME name that corresponds, and use that as the display charset.
+#
+# It also modifies the default value for ASSUME_CHARSET; it does not override
+# that setting.
+#
+# Note that while nl_langinfo(CODESET) itself is standardized, the return
+# values and their relationship to the locale value is not.  GNU libiconv
+# happens to give useful values, but other implementations are not guaranteed
+# to do this.
+LOCALE_CHARSET:TRUE
+
+.h2 HTML5_CHARSETS
+# HTML5_CHARSETS is an alternative to ASSUME_CHARSET and ASSUME_LOCAL_CHARSET.
+# Those assume by default that the character set of an HTML document is (as is
+# standard in HTML4) ISO-8859-1, in the absence of locale information.
+#
+# HTML5 introduces a "compatibility" (sic) feature which assumes that the
+# default is Windows 1252.  In the same way, it equates ISO-8859-4 and Windows
+# 1254.  Finally, it also makes recommendations which selectively reinterpret
+# the locale encoding.
+#
+# This option currently implements only the equating of ISO-8859-1 and Windows
+# 1252.
+#
+#HTML5_CHARSETS:FALSE
+
+.h2 ASSUME_CHARSET
+# ASSUME_CHARSET changes the handling of documents which do not
+# explicitly specify a charset.  Normally Lynx assumes that 8-bit
+# characters in those documents are encoded according to iso-8859-1
+# (the official default for the HTTP protocol).  When ASSUME_CHARSET
+# is defined here or by an -assume_charset command line flag is in effect,
+# Lynx will treat documents as if they were encoded accordingly.
+# See above on how this interacts with "raw mode" and the Display
+# Character Set.
+# ASSUME_CHARSET can also be changed via the 'o'ptions menu but will
+# not be saved as permanent value in user's .lynxrc file to avoid more chaos.
+#
+#ASSUME_CHARSET:iso-8859-1
+
+.h2 ASSUMED_DOC_CHARSET_CHOICE
+.h2 DISPLAY_CHARSET_CHOICE
+# It is possible to reduce the number of charset choices in the 'O'ptions menu
+# for "display charset" and "assumed document charset" fields via
+# DISPLAY_CHARSET_CHOICE and ASSUMED_DOC_CHARSET_CHOICE settings correspondingly.
+# Each of these settings can be used several times to define the set of possible
+# choices for corresponding field. The syntax for the values is
+#
+#       string | prefix* | *
+#
+# where
+#
+#       'string' is either the MIME name of charset or it's full name (listed
+#               either in the left or in the right column of table of
+#               recognized charsets), case-insensitive - e.g.  'Koi8-R' or
+#               'Cyrillic (KOI8-R)' (both without quotes),
+#
+#       'prefix' is any string, and such value will select all charsets having
+#               the name with prefix matching given (case insensitive), i.e.,
+#               for the charsets listed in the table of recognized charsets,
+#
+.ex
+# ASSUMED_DOC_CHARSET_CHOICE:cyrillic*
+#               will be equal to specifying
+.ex 4
+# ASSUMED_DOC_CHARSET_CHOICE:cp866
+# ASSUMED_DOC_CHARSET_CHOICE:windows-1251
+# ASSUMED_DOC_CHARSET_CHOICE:koi8-r
+# ASSUMED_DOC_CHARSET_CHOICE:iso-8859-5
+#               or lines with full names of charsets.
+#
+#       literal string '*' (without quotes) will enable all charset choices
+#               in corresponding field.  This is useful for overriding site
+#               defaults in private pieces of lynx.cfg included via INCLUDE
+#               directive.
+#
+# Default values for both settings are '*', but any occurrence of settings
+# with values that denote any charsets will make only listed choices available
+# for corresponding field.
+#ASSUMED_DOC_CHARSET_CHOICE:*
+#DISPLAY_CHARSET_CHOICE:*
+
+.h2 ASSUME_LOCAL_CHARSET
+# ASSUME_LOCAL_CHARSET is like ASSUME_CHARSET but only applies to local
+# files.  If no setting is given here or by an -assume_local_charset
+# command line option, the value for ASSUME_CHARSET or -assume_charset
+# is used.  It works for both text/plain and text/html files.
+# This option will ignore "raw mode" toggling when local files are viewed
+# (it is "stronger" than "assume_charset" or the effective change
+# of the charset assumption caused by changing "raw mode"),
+# so only use when necessary.
+#
+#ASSUME_LOCAL_CHARSET:iso-8859-1
+
+.h2 PREPEND_CHARSET_TO_SOURCE
+# PREPEND_CHARSET_TO_SOURCE:TRUE tells Lynx to prepend a META CHARSET line
+# to text/html source files when they are retrieved for 'd'ownloading
+# or passed to 'p'rint functions, so HTTP headers will not be lost.
+# This is necessary for resolving charset for local html files,
+# while the assume_local_charset is just an assumption.
+# For the 'd'ownload option, a META CHARSET will be added only if the HTTP
+# charset is present.  The compilation default is TRUE.
+# It is generally desirable to have charset information for every local
+# html file, but META CHARSET string potentially could cause
+# compatibility problems with other browsers, see also PREPEND_BASE_TO_SOURCE.
+# Note that the prepending is not done for -source dumps.
+#
+#PREPEND_CHARSET_TO_SOURCE:TRUE
+
+.h2 NCR_IN_BOOKMARKS
+# NCR_IN_BOOKMARKS:TRUE allows you to save 8-bit characters in bookmark titles
+# in the unicode format (NCR).  This may be useful if you need to switch
+# display charsets frequently.  This is the case when you use Lynx on different
+# platforms, e.g., on UNIX and from a remote PC, and want to keep the bookmarks
+# file persistent.
+# Another aspect is compatibility:  NCR is part of I18N and HTML4.0
+# specifications supported starting with Lynx 2.7.2, Netscape 4.0 and MSIE 4.0.
+# Older browser versions will fail so keep NCR_IN_BOOKMARKS:FALSE if you
+# plan to use them.
+#
+#NCR_IN_BOOKMARKS:FALSE
+
+.h2 FORCE_8BIT_TOUPPER
+# FORCE_8BIT_TOUPPER overrides locale settings and uses internal 8-bit
+# case-conversion mechanism for case-insensitive searches in non-ASCII display
+# character sets.  It is FALSE by default and should not be changed unless
+# you encounter problems with case-insensitive searches.
+#
+#FORCE_8BIT_TOUPPER:FALSE
+
+.h2 OUTGOING_MAIL_CHARSET
+# While Lynx supports different platforms and display character sets
+# we need to limit the charset in outgoing mail to reduce
+# trouble for remote recipients who may not recognize our charset.
+# You may try US-ASCII as the safest value (7 bit), any other MIME name,
+# or leave this field blank (default) to use the display character set.
+# Charset translations currently are implemented for mail "subjects= " only.
+#
+#OUTGOING_MAIL_CHARSET:
+
+.h2 ASSUME_UNREC_CHARSET
+# If Lynx encounters a charset parameter it doesn't recognize, it will
+# replace the value given by ASSUME_UNREC_CHARSET (or a corresponding
+# -assume_unrec_charset command line option) for it.  This can be used
+# to deal with charsets unknown to Lynx, if they are "sufficiently
+# similar" to one that Lynx does know about, by forcing the same
+# treatment.  There is no default, and you probably should leave this
+# undefined unless necessary.
+#
+#ASSUME_UNREC_CHARSET:iso-8859-1
+
+.h2 PREFERRED_LANGUAGE
+# PREFERRED_LANGUAGE is the language in MIME notation (e.g., "en",
+# "fr") which will be indicated by Lynx in its Accept-Language headers
+# as the preferred language.  If available, the document will be
+# transmitted in that language.  Users can override this setting via
+# the 'o'ptions menu and save that preference in their RC file.
+# This may be a comma-separated list of languages in decreasing preference.
+#
+#PREFERRED_LANGUAGE:en
+
+.h2 PREFERRED_CHARSET
+# PREFERRED_CHARSET specifies the character set in MIME notation (e.g.,
+# "ISO-8859-2", "ISO-8859-5") which Lynx will indicate you prefer in
+# requests to http servers using an Accept-Charsets header.  Users can
+# change it via the 'o'ptions menu and save that preference in their RC file.
+# The value should NOT include "ISO-8859-1" or "US-ASCII",
+# since those values are always assumed by default.
+# If a file in that character set is available, the server will send it.
+# If no Accept-Charset header is present, the default is that any
+# character set is acceptable.  If an Accept-Charset header is present,
+# and if the server cannot send a response which is acceptable
+# according to the Accept-Charset header, then the server SHOULD send
+# an error response with the 406 (not acceptable) status code, though
+# the sending of an unacceptable response is also allowed.  See RFC 2068
+.url http://tools.ietf.org/html/rfc2068
+#
+#PREFERRED_CHARSET:
+
+.h2 CHARSETS_DIRECTORY
+# CHARSETS_DIRECTORY specifies the directory with the fonts (glyph data)
+# used by Lynx to switch the display-font to a font best suited for the
+# given document.  The font should be in a format understood by the
+# platforms TTY-display-font-switching API.  Currently supported on OS/2 only.
+#
+# Lynx expects the glyphs for the charset CHARSET with character cell
+# size HHHxWWW to be stored in a file HHHxWWW/CHARSET.fnt inside the directory
+# specified by CHARSETS_DIRECTORY.  E.g., the font for koi8-r sized 14x9
+# should be in the file 14x9/koi8-r.fnt.
+#
+#CHARSETS_DIRECTORY:
+
+.h2 CHARSET_SWITCH_RULES
+# CHARSET_SWITCH_RULES hints lynx on how to choose the best display font given
+# the document encoding.  This string is a sequence of chunks, each chunk
+# having the following form:
+#
+# IN_CHARSET1 IN_CHARSET2 ... IN_CHARSET5 :OUT_CHARSET
+#
+# For readability, one may insert arbitrary additional punctuation (anything
+# but : is ignored).  E.g., if lynx is able to switch only to display charsets
+# cp866, cp850, cp852, and cp862, then the following setting may be useful
+# (split for readability):
+#
+# CHARSET_SWITCH_RULES: koi8-r ISO-8859-5 windows-1251 cp866u KOI8-U :cp866,
+#       iso-8859-1 windows-1252 ISO-8859-15 :cp850,
+#       ISO-8859-2 windows-1250 :cp852,
+#       ISO-8859-8 windows-1255 :cp862
+#
+#CHARSET_SWITCH_RULES:
+
+.h1 Interaction
+
+.h2 URL_DOMAIN_PREFIXES
+.h2 URL_DOMAIN_SUFFIXES
+# URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES are strings which will be
+# prepended (together with a scheme://) and appended to the first element
+# of command line or 'g'oto arguments which are not complete URLs and
+# cannot be opened as a local file (file://localhost/string).  Both
+# can be comma-separated lists.  Each prefix must end with a dot, each
+# suffix must begin with a dot, and either may contain other dots (e.g.,
+# .com.jp).  The default lists are defined in userdefs.h and can be
+# replaced here.  Each prefix will be used with each suffix, in order,
+# until a valid Internet host is created, based on a successful DNS
+# lookup (e.g., foo will be tested as www.foo.com and then www.foo.edu
+# etc.).  The first element can include a :port and/or /path which will
+# be restored with the expanded host (e.g., wfbr:8002/dir/lynx will
+# become http://www.wfbr.edu:8002/dir/lynx).  The prefixes will not be
+# used if the first element ends in a dot (or has a dot before the
+# :port or /path), and similarly the suffixes will not be used if the
+# the first element begins with a dot (e.g., .nyu.edu will become
+# http://www.nyu.edu without testing www.nyu.com).  Lynx will try to
+# guess the scheme based on the first field of the expanded host name,
+# and use "http://" as the default (e.g., gopher.wfbr.edu or gopher.wfbr.
+# will be made gopher://gopher.wfbr.edu).
+#
+#URL_DOMAIN_PREFIXES:www.
+#URL_DOMAIN_SUFFIXES:.com,.edu,.net,.org
+
+.h2 FORMS_OPTIONS
+# Toggle whether the Options Menu is key-based or form-based;
+# the key-based version is available only if specified at compile time.
+#FORMS_OPTIONS:TRUE
+
+.h2 PARTIAL
+# Display partial pages while downloading
+#PARTIAL:TRUE
+
+.h2 PARTIAL_THRES
+# Set the threshold # of lines Lynx must render before it
+# redraws the screen in PARTIAL mode.  Anything < 0 implies
+# use of the screen size.
+#PARTIAL_THRES:-1
+
+.h2 SHOW_KB_RATE
+# While getting large files, Lynx shows the approximate rate of transfer.
+# Set this to change the units shown.  "Kilobytes" denotes 1024 bytes:
+#       NONE to disable the display of transfer rate altogether.
+#       TRUE or KB for Kilobytes/second.
+#       FALSE or BYTES for bytes/second.
+#       KB,ETA to show Kilobytes/second with estimated completion time.
+#       BYTES,ETA to show BYTES/second with estimated completion time.
+#       KB2,ETA to show Kilobytes/second with estimated completion time using 2-digits.
+#       BYTES2,ETA to show BYTES/second with estimated completion time using 2-digits.
+# Note that the "ETA" values are available if USE_READPROGRESS was defined.
+#SHOW_KB_RATE:TRUE
+
+.h2 SHOW_KB_NAME
+# Set the abbreviation for Kilobytes (1024).
+# Quoting from
+.url http://www.romulus2.com/articles/guides/misc/bitsbytes.shtml
+# In December 1998, the International Electrotechnical Commission (IEC)
+# approved a new IEC International Standard.  Instead of using the metric
+# prefixes for multiples in binary code, the new IEC standard invented specific
+# prefixes for binary multiples made up of only the first two letters of the
+# metric prefixes and adding the first two letters of the word "binary".  Thus,
+# for instance, instead of Kilobyte (KB) or Gigabyte (GB), the new terms would
+# be kibibyte (KiB) or gibibyte (GiB).
+#
+# If you prefer using the conventional (and more common) "KB", modify this
+# setting.
+#SHOW_KB_NAME:KiB
+
+.h1 Timeouts
+
+.h2 INFOSECS
+.h2 MESSAGESECS
+.h2 ALERTSECS
+.h2 NO_PAUSE
+# The following definitions set the number of seconds for
+# pauses following statusline messages that would otherwise be
+# replaced immediately, and are more important than the unpaused
+# progress messages.  Those set by INFOSECS are also basically
+# progress messages (e.g., that a prompted input has been canceled)
+# and should have the shortest pause.  Those set by MESSAGESECS are
+# informational (e.g., that a function is disabled) and should have
+# a pause of intermediate duration.  Those set by ALERTSECS typically
+# report a serious problem and should be paused long enough to read
+# whenever they appear (typically unexpectedly).  The default values
+# are defined in userdefs.h, and can be modified here should longer
+# pauses be desired for braille-based access to Lynx.
+#
+# SVr4-curses implementations support time delays in milliseconds,
+# hence the value may be given shorter, e.g., 0.5
+#
+# Use the NO_PAUSE option (like the command-line -nopause) to override
+# all of the delay times.
+#
+#INFOSECS:1
+#MESSAGESECS:2
+#ALERTSECS:3
+#NO_PAUSE:FALSE
+
+.h2 DEBUGSECS
+# Set DEBUGSECS to a nonzero value to slow down progress messages
+# (see "-delay" option).
+#DEBUGSECS:0
+
+.h2 REPLAYSECS
+# Set REPLAYSECS to a nonzero value to allow for slow replaying of
+# command scripts (see "-cmd_script" option).
+#REPLAYSECS:0
+
+.h1 Appearance
+# These settings control the appearance of Lynx's screen and the way
+# Lynx renders some tags.
+
+.h2 USE_SELECT_POPUPS
+# If USE_SELECT_POPUPS is set FALSE, Lynx will present a vertical list of
+# radio buttons for the OPTIONs in SELECT blocks which lack the MULTIPLE
+# attribute, instead of using a popup menu.  Note that if the MULTIPLE
+# attribute is present in the SELECT start tag, Lynx always will create a
+# vertical list of checkboxes for the OPTIONs.
+# The default defined here or in userdefs.h can be changed via the 'o'ptions
+# menu and saved in the RC file, and always can be toggled via the -popup
+# command line switch.
+#
+#USE_SELECT_POPUPS:TRUE
+
+.h2 SHOW_CURSOR
+# SHOW_CURSOR controls whether or not the cursor is hidden or appears
+# over the current link in documents or the current option in popups.
+# Showing the cursor is handy if you are a sighted user with a poor
+# terminal that can't do bold and reverse video at the same time or
+# at all.  It also can be useful to blind users, as an alternative
+# or supplement to setting LINKS_AND_FIELDS_ARE_NUMBERED or
+# LINKS_ARE_NUMBERED.
+# The default defined here or in userdefs.h can be changed via the
+# 'o'ptions menu and saved in the RC file, and always can be toggled
+# via the -show_cursor command line switch.
+#
+#SHOW_CURSOR:FALSE
+
+.h2 UNDERLINE_LINKS
+# UNDERLINE_LINKS controls whether links are underlined by default, or shown
+# in bold.  Normally this default is set from the configure script.
+#
+#UNDERLINE_LINKS:FALSE
+
+.h2 BOLD_HEADERS
+# If BOLD_HEADERS is set to TRUE the HT_BOLD default style will be acted
+# upon for <H1> through <H6> headers.  The compilation default is FALSE
+# (only the indentation styles are acted upon, but see BOLD_H1, below).
+# On Unix, compilation with -DUNDERLINE_LINKS also will apply to the
+# HT_BOLD style for headers when BOLD_HEADERS is TRUE.
+#
+#BOLD_HEADERS:FALSE
+
+.h2 BOLD_H1
+# If BOLD_H1 is set to TRUE the HT_BOLD default style will be acted
+# upon for <H1> headers even if BOLD_HEADERS is FALSE.  The compilation
+# default is FALSE.  On Unix, compilation with -DUNDERLINE_LINKS also
+# will apply to the HT_BOLD style for headers when BOLD_H1 is TRUE.
+#
+#BOLD_H1:FALSE
+
+.h2 BOLD_NAME_ANCHORS
+# If BOLD_NAME_ANCHORS is set to TRUE the content of anchors without
+# an HREF attribute, (i.e., anchors with a NAME or ID attribute) will
+# have the HT_BOLD default style.  The compilation default is FALSE.
+# On Unix, compilation with -DUNDERLINE_LINKS also will apply to the
+# HT_BOLD style for NAME (ID) anchors when BOLD_NAME_ANCHORS is TRUE.
+#
+#BOLD_NAME_ANCHORS:FALSE
+
+.h1 Internal Behavior
+
+.h2 DEFAULT_CACHE_SIZE
+.h2 DEFAULT_VIRTUAL_MEMORY_SIZE
+# The DEFAULT_CACHE_SIZE specifies the number of WWW documents to be
+# cached in memory at one time.
+#
+# This so-called cache size (actually, number) is defined in userdefs.h and
+# may be modified here and/or with the command line argument -cache=NUMBER
+# The minimum allowed value is 2, for the current document and at least one
+# to fetch, and there is no absolute maximum number of cached documents.
+# On Unix, and VMS not compiled with VAXC, whenever the number is exceeded
+# the least recently displayed document will be removed from memory.
+#
+# On VMS compiled with VAXC, the DEFAULT_VIRTUAL_MEMORY_SIZE specifies the
+# amount (bytes) of virtual memory that can be allocated and not yet be freed
+# before previous documents are removed from memory.  If the values for both
+# the DEFAULT_CACHE_SIZE and DEFAULT_VIRTUAL_MEMORY_SIZE are exceeded, then
+# the least recently displayed documents will be freed until one or the other
+# value is no longer exceeded.  The default value is defined in userdefs.h.
+#
+# The Unix and VMS (but not VAXC) implementations use the C library malloc's
+# and calloc's for memory allocation, but procedures for taking the actual
+# amount of cache into account still need to be developed.  They use only
+# the DEFAULT_CACHE_SIZE value, and that specifies the absolute maximum
+# number of documents to cache (rather than the maximum number only if
+# DEFAULT_VIRTUAL_MEMORY_SIZE has been exceeded, as with VAXC/VAX).
+#
+#DEFAULT_CACHE_SIZE:10
+#DEFAULT_VIRTUAL_MEMORY_SIZE:512000
+
+.h2 SOURCE_CACHE
+# SOURCE_CACHE sets the source caching behavior for Lynx:
+#
+# FILE causes Lynx to keep a temporary file for each cached document
+#   containing the HTML source of the document, which it uses to regenerate
+#   the document when certain settings are changed (for instance,
+#   historical vs. minimal vs. valid comment parsing) instead of reloading
+#   the source from the network.
+#
+# MEMORY is like FILE, except the document source is kept in memory.  You
+#   may wish to adjust DEFAULT_CACHE_SIZE and DEFAULT_VIRTUAL_MEMORY_SIZE
+#   accordingly.
+#
+# NONE is the default; the document source is not cached, and is reloaded
+#   from the network when needed.
+#
+#SOURCE_CACHE:NONE
+
+.h2 SOURCE_CACHE_FOR_ABORTED
+# This setting controls what will happen with cached source for the document
+# being fetched from the net if fetching was aborted (either user pressed
+# 'z' or network went down). If set to KEEP, the source fetched so far will
+# be preserved (and used as cache), if set to DROP lynx will drop the
+# source cache for that document (i.e. only completely downloaded documents
+# will be cached in that case).
+#SOURCE_CACHE_FOR_ABORTED:DROP
+
+.h2 ALWAYS_RESUBMIT_POSTS
+# If ALWAYS_RESUBMIT_POSTS is set TRUE, Lynx always will resubmit forms
+# with method POST, dumping any cache from a previous submission of the
+# form, including when the document returned by that form is sought with
+# the PREV_DOC command or via the history list.  Lynx always resubmits
+# forms with method POST when a submit button or a submitting text input
+# is activated, but normally retrieves the previously returned document
+# if it had links which you activated, and then go back with the PREV_DOC
+# command or via the history list.
+#
+# The default defined here or in userdefs.h can be toggled via
+# the -resubmit_forms command line switch.
+#
+#ALWAYS_RESUBMIT_POSTS:FALSE
+
+.h2 TRIM_INPUT_FIELDS
+# If TRIM_INPUT_FIELDS is set TRUE, Lynx will trim trailing whitespace (e.g.,
+# space, tab, carriage return, line feed and form feed) from the text entered
+# into form text and textarea fields.  Older versions of Lynx do this trimming
+# unconditionally, but other browsers do not, which would yield different
+# behavior for CGI scripts.
+#TRIM_INPUT_FIELDS:FALSE
+
+.h1 HTML Parsing
+
+.h2 NO_ISMAP_IF_USEMAP
+# If NO_ISMAP_IF_USEMAP is set TRUE, Lynx will not include a link to the
+# server-side image map if both a server-side and client-side map for the
+# same image is indicated in the HTML markup.  The compilation default is
+# FALSE, such that a link with "[ISMAP]" as the link name, followed by a
+# hyphen, will be prepended to the ALT string or "[USEMAP]" pseudo-ALT for
+# accessing Lynx's text-based rendition of the client-side map (based on
+# the content of the associated MAP element).  If the "[ISMAP]" link is
+# activated, Lynx will send a 0,0 coordinate pair to the server, which
+# Lynx-friendly sites can map to a for-text-client document, homologous
+# to what is intended for the content of a FIG element.
+#
+# The compilation default, or default defined here, can be toggled via
+# the "-ismap" command line switch.
+#
+#NO_ISMAP_IF_USEMAP:FALSE
+
+.h2 SEEK_FRAG_MAP_IN_CUR
+# If SEEK_FRAG_MAP_IN_CUR is set FALSE, then USEMAP attribute values
+# (in IMG or OBJECT tags) consisting of only a fragment (USEMAP="#foo")
+# will be resolved with respect to the current document's base, which
+# might not be the same as the current document's URL.
+# The compilation default is to use the current document's URL in all
+# cases (i.e., assume the MAP is present below, if it wasn't present
+# above the point in the HTML stream where the USEMAP attribute was
+# detected).  Lynx's present "single pass" rendering engine precludes
+# checking below before making the decision on how to resolve a USEMAP
+# reference consisting solely of a fragment.
+#
+#SEEK_FRAG_MAP_IN_CUR:TRUE
+
+.h2 SEEK_FRAG_AREA_IN_CUR
+# If SEEK_FRAG_AREA_IN_CUR is set FALSE, then HREF attribute values
+# in AREA tags consisting of only a fragment (HREF="#foo") will be
+# resolved with respect to the current document's base, which might
+# not be the same as the current document's URL.  The compilation
+# default is to use the current document's URL, as is done for the
+# HREF attribute values of Anchors and LINKs that consist solely of
+# a fragment.
+#
+#SEEK_FRAG_AREA_IN_CUR:TRUE
+
+.h1 CGI scripts
+# These settings control Lynx's ability to execute various types of scripts.
+
+.h2 LOCAL_EXECUTION_LINKS_ALWAYS_ON
+.h2 LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE
+# Local execution links and scripts are by default completely disabled,
+# unless a change is made to the userdefs.h file to enable them or
+# the configure script is used with the corresponding options
+# (-enable-exec-links and -enable-exec-scripts).
+# See the Lynx source code distribution and the userdefs.h
+# file for more detail on enabling execution links and scripts.
+#
+# If you have enabled execution links or scripts the following
+# two variables control Lynx's action when an execution link
+# or script is encountered.
+#
+# If LOCAL_EXECUTION_LINKS_ALWAYS_ON is set to TRUE any execution
+# link or script will be executed no matter where it came from.
+# This is EXTREMELY dangerous.  Since Lynx can access files from
+# anywhere in the world, you may encounter links or scripts that
+# will cause damage or compromise the security of your system.
+#
+# If LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE is set to TRUE only
+# links or scripts that reside on the local machine and are
+# referenced with a URL beginning with "file://localhost/" or meet
+# TRUSTED_EXEC or ALWAYS_TRUSTED_EXEC rules (see below) will be
+# executed.  This is much less dangerous than enabling all execution
+# links, but can still be dangerous.
+#
+#LOCAL_EXECUTION_LINKS_ALWAYS_ON:FALSE
+#LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE:FALSE
+
+.h2 TRUSTED_EXEC
+# If LOCAL_EXECUTION_LINK_ON_BUT_NOT_REMOTE is TRUE, and no TRUSTED_EXEC
+# rule is defined, it defaults to "file://localhost/" and any lynxexec
+# or lynxprog command will be permitted if it was referenced from within
+# a document whose URL begins with that string.  If you wish to restrict the
+# referencing URLs further, you can extend the string to include a trusted
+# path.  You also can specify a trusted directory for http URLs, which will
+# then be treated as if they were local rather than remote.  For example:
+#
+#       TRUSTED_EXEC:file://localhost/trusted/
+#       TRUSTED_EXEC:http://www.wfbr.edu/trusted/
+#
+# If you also wish to restrict the commands which can be executed, create
+# a series of rules with the path (Unix) or command name (VMS) following
+# the string, separated by a tab.  For example:
+#
+# Unix:
+# ====
+#       TRUSTED_EXEC:file://localhost/<tab>/bin/cp
+#       TRUSTED_EXEC:file://localhost/<tab>/bin/rm
+# VMS:
+# ===
+#       TRUSTED_EXEC:file://localhost/<tab>copy
+#       TRUSTED_EXEC:file://localhost/<tab>delete
+#
+# Once you specify a TRUSTED_EXEC referencing string, the default is
+# replaced, and all the referencing strings you desire must be specified
+# as a series.  Similarly, if you associate a command with the referencing
+# string, you must specify all of the allowable commands as a series of
+# TRUSTED_EXEC rules for that string.  If you specify ALWAYS_TRUSTED_EXEC
+# rules below, you need not repeat them as TRUSTED_EXEC rules.
+#
+# If EXEC_LINKS and JUMPFILE have been defined, any lynxexec or lynxprog
+# URLs in that file will be permitted, regardless of other settings.  If
+# you also set LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE:TRUE and a single
+# TRUSTED_EXEC rule that will always fail (e.g., "none"), then *ONLY* the
+# lynxexec or lynxprog URLs in JUMPFILE (and any ALWAYS_TRUSTED_EXEC rules,
+# see below) will be allowed.  Note, however, that if Lynx was compiled with
+# CAN_ANONYMOUS_JUMP set to FALSE (default is TRUE), or -restrictions=jump
+# is included with the -anonymous switch at run time, then users of an
+# anonymous account will not be able to access the jumps file or enter
+# 'j'ump shortcuts, and this selective execution feature will be overridden
+# as well (i.e., they will only be able to access lynxexec or lynxprog
+# URLs which meet any ALWAYS_TRUSTED_EXEC rules).
+#
+#TRUSTED_EXEC:none
+
+.h2 ALWAYS_TRUSTED_EXEC
+# If EXEC_LINKS was defined, any lynxexec or lynxprog URL can be made
+# always enabled by an ALWAYS_TRUSTED_EXEC rule for it.  This is useful for
+# anonymous accounts in which you have disabled execution links generally,
+# and may also have disabled jumps file links, but still want to allow
+# execution of particular utility scripts or programs.  The format is
+# like that for TRUSTED_EXEC.  For example:
+#
+# Unix:
+# ====
+#   ALWAYS_TRUSTED_EXEC:file://localhost/<tab>/usr/local/kinetic/bin/usertime
+#   ALWAYS_TRUSTED_EXEC:http://www.more.net/<tab>/usr/local/kinetic/bin/who.sh
+# VMS:
+# ===
+#   ALWAYS_TRUSTED_EXEC:file://localhost/<tab>usertime
+#   ALWAYS_TRUSTED_EXEC:http://www.more.net/<tab>show users
+#
+# The default ALWAYS_TRUSTED_EXEC rule is "none".
+#
+#ALWAYS_TRUSTED_EXEC:none
+
+.h2 TRUSTED_LYNXCGI
+# Unix:
+# =====
+# TRUSTED_LYNXCGI rules define the permitted sources and/or paths for
+# lynxcgi links (if LYNXCGI_LINKS is defined in userdefs.h).  The format
+# is the same as for TRUSTED_EXEC rules (see above).  Example rules:
+#
+#       TRUSTED_LYNXCGI:file://localhost/
+#       TRUSTED_LYNXCGI:<tab>/usr/local/etc/httpd/cgi-bin/
+#       TRUSTED_LYNXCGI:file://localhost/<tab>/usr/local/www/cgi-bin/
+#
+# VMS:
+# ====
+# Do not define this.
+#
+# The default TRUSTED_LYNXCGI rule is "none".
+#
+TRUSTED_LYNXCGI:none
+
+.h2 LYNXCGI_ENVIRONMENT
+# Unix:
+# =====
+# LYNXCGI_ENVIRONMENT adds the current value of the specified
+# environment variable to the list of environment variables passed on to the
+# lynxcgi script.  Useful variables are HOME, USER, etc...  If proxies
+# are in use, and the script invokes another copy of lynx (or a program like
+# wget) in a subsidiary role, it can be useful to add http_proxy and other
+# *_proxy variables.
+#
+# VMS:
+# ====
+# Do not define this.
+#
+#LYNXCGI_ENVIRONMENT:
+
+.h2 LYNXCGI_DOCUMENT_ROOT
+# Unix:
+# =====
+# LYNXCGI_DOCUMENT_ROOT is the value of DOCUMENT_ROOT that will be passed
+# to lynxcgi scripts.  If set and the URL has PATH_INFO data, then
+# PATH_TRANSLATED will also be generated.  Examples:
+#       LYNXCGI_DOCUMENT_ROOT:/usr/local/etc/httpd/htdocs
+#       LYNXCGI_DOCUMENT_ROOT:/data/htdocs/
+#
+# VMS:
+# ====
+# Do not define this.
+#
+#LYNXCGI_DOCUMENT_ROOT:
+
+.h1 Cookies
+
+.h2 FORCE_SSL_COOKIES_SECURE
+# If FORCE_SSL_COOKIES_SECURE is set to TRUE, then SSL encrypted cookies
+# received from https servers never will be sent unencrypted to http
+# servers.  The compilation default is to impose this block only if the
+# https server included a secure attribute for the cookie.  The normal
+# default or that defined here can be toggled via the -force_secure
+# command line switch.
+#
+#FORCE_SSL_COOKIES_SECURE:FALSE
+
+.h1 Internal Behavior
+
+.h2 MAIL_SYSTEM_ERROR_LOGGING
+#  MAIL_SYSTEM_ERROR_LOGGING will send a message to the owner of
+#  the information, or ALERTMAIL if there is no owner, every time
+#  that a document cannot be accessed!
+#
+#  NOTE:  This can generate A LOT of mail, be warned.
+#
+#MAIL_SYSTEM_ERROR_LOGGING:FALSE
+
+.h2 CHECKMAIL
+# If CHECKMAIL is set to TRUE, the user will be informed (via a statusline
+# message) about the existence of any unread mail at startup of Lynx, and
+# will get statusline messages if subsequent new mail arrives.  If a jumps
+# file with a lynxprog URL for invoking mail is available, or your html
+# pages include an mail launch file URL, the user thereby can access mail
+# and read the messages.  The checks and statusline reports will not be
+# performed if Lynx has been invoked with the -restrictions=mail switch.
+#
+# VMS USERS !!!
+# =============
+# New mail is normally broadcast as it arrives, via "unsolicited screen
+# broadcasts", which can be "wiped" from the Lynx display via the Ctrl-W
+# command.  You may prefer to disable the broadcasts and use CHECKMAIL
+# instead (e.g., in a public account which will be used by people who
+# are ignorant about VMS).
+#
+#CHECKMAIL:FALSE
+
+.h1 News-groups
+
+.h2 NNTPSERVER
+# To enable news reading ability via Lynx, the environment variable NNTPSERVER
+# must be set so that it points to your site's NNTP server
+# (see Lynx Users Guide on environment variables).
+# Lynx respects RFC 1738
+.url http://tools.ietf.org/html/rfc1738
+# and does not accept a host field in news URLs (use nntp: instead of news: for
+# the scheme if you wish to specify an NNTP host in a URL, as explained in the
+# RFC).  If you have not set the variable externally, you can set it at run
+# time via this configuration file.  It will not override an external setting.
+# Note that on VMS it is set as a process logical rather than symbol, and will
+# outlive the Lynx image.
+# The news reading facility in Lynx is quite limited.  Lynx does not provide a
+# full featured news reader with elaborate error checking and safety features.
+#
+#NNTPSERVER:news.server.dom
+
+.h2 LIST_NEWS_NUMBERS
+# If LIST_NEWS_NUMBERS is set TRUE, Lynx will use an ordered list and include
+# the numbers of articles in news listings, instead of using an unordered
+# list.  The default is defined in userdefs.h, and can be overridden here.
+#
+#LIST_NEWS_NUMBERS:FALSE
+
+.h2 LIST_NEWS_DATES
+# If LIST_NEWS_DATES is set TRUE, Lynx will include the dates of articles in
+# news listings.  The dates always are included in the articles, themselves.
+# The default is defined in userdefs.h, and can be overridden here.
+#
+#LIST_NEWS_DATES:FALSE
+
+.h2 NEWS_CHUNK_SIZE
+.h2 NEWS_MAX_CHUNK
+# NEWS_CHUNK_SIZE and NEWS_MAX_CHUNK regulate the chunking of news article
+# listings with inclusion of links for listing earlier and/or later articles.
+# The defaults are defined in HTNews.c as 30 and 40, respectively.  If the
+# news group contains more than NEWS_MAX_CHUNK articles, they will be listed
+# in NEWS_CHUNK_SIZE chunks.  You can change the defaults here, and/or on
+# the command line via -newschunksize=NUMBER and/or -newsmaxchunk=NUMBER
+# switches.  Note that if the chunk size is increased, here or on the command
+# line, to a value greater than the current maximum, the maximum will be
+# increased to that number.  Conversely, if the maximum is set to a number
+# less than the current chunk size, the chunk size will be reduced to that
+# number.  Thus, you need use only one of the two switches on the command
+# line, based on the direction of intended change relative to the compilation
+# or configuration defaults.  The compilation defaults ensure that there will
+# be at least 10 earlier articles before bothering to chunk and create a link
+# for earlier articles.
+#
+#NEWS_CHUNK_SIZE:30
+#NEWS_MAX_CHUNK:40
+
+.h2 NEWS_POSTING
+# Set NEWS_POSTING to FALSE if you do not want to support posting to
+# news groups via Lynx.  If left TRUE, Lynx will use its news gateway to
+# post new messages or followups to news groups, using the URL schemes
+# described in the "Supported URLs" section of the online 'h'elp.  The
+# posts will be attempted via the nntp server specified in the URL, or
+# if none was specified, via the NNTPSERVER configuration or environment
+# variable.  Links with these URLs for posting or sending followups are
+# created by the news gateway when reading group listings or articles
+# from nntp servers if the server indicates that it permits posting.
+# The compilation default set in userdefs.h can be changed here.  If
+# the default is TRUE, posting can still be disallowed via the
+# -restrictions command line switch.
+# The posting facility in Lynx is quite limited.  Lynx does not provide a
+# full featured news poster with elaborate error checking and safety features.
+#
+#NEWS_POSTING:TRUE
+
+.h2 LYNX_SIG_FILE
+# LYNX_SIG_FILE defines the name of a file containing a signature which
+# can be appended to email messages and news postings or followups.  The
+# user will be prompted whether to append it.  It is sought in the home
+# directory.  If it is in a subdirectory, begin it with a dot-slash
+# (e.g., ./lynx/.lynxsig).  The definition is set in userdefs.h and can
+# be changed here.
+#
+#LYNX_SIG_FILE:.lynxsig
+
+.h1 Bibliographic Protocol (bibp scheme)
+
+.h2 BIBP_GLOBAL_SERVER
+# BIBP_GLOBAL_SERVER is the default global server for bibp: links, used
+# when a local bibhost or document-specified citehost is unavailable.
+# Set in userdefs.h and can be changed here.
+#BIBP_GLOBAL_SERVER:http://usin.org/
+
+.h2 BIBP_BIBHOST
+# BIBP_BIBHOST is the URL at which local bibp service may be found, if
+# it exists.   Defaults to http://bibhost/ for protocol conformance, but
+# may be overridden here or via -bibhost parameter.
+#BIBP_BIBHOST:http://bibhost/
+
+.h1 Interaction
+# These settings control interaction of the user with lynx.
+
+.h2 SCROLLBAR
+# If SCROLLBAR is set TRUE, Lynx will show scrollbar on windows.  With mouse
+# enabled, the scrollbar strip outside the bar is clickable, and scrolls the
+# window by pages.  The appearance of the scrollbar can be changed from
+# LYNX_LSS file:  define attributes scroll.bar, scroll.back (for the bar, and
+# for the strip along which the scrollbar moves).
+#SCROLLBAR:FALSE
+
+.h2 SCROLLBAR_ARROW
+# If SCROLLBAR_ARROW is set TRUE, Lynx's scrollbar will have arrows at the
+# ends.  With mouse enabled, the arrows are clickable, and scroll the window by
+# 2 lines.  The appearance of the scrollbar arrows can be changed from LYNX_LSS
+# file:  define attributes scroll.arrow, scroll.noarrow (for enabled-arrows,
+# and disabled arrows).  An arrow is "disabled" if the bar is at this end of
+# the strip.
+#SCROLLBAR_ARROW:TRUE
+
+.h2 USE_MOUSE
+# If Lynx is configured with ncurses, PDcurses or slang & USE_MOUSE is TRUE,
+# users can perform commands by left-clicking certain parts of the screen:
+#   on a link = `g'oto + ACTIVATE (i.e., move highlight & follow the link);
+#   on the top/bottom lines = PREV/NEXT_PAGE (i.e., go up/down 1 page);
+#   on the top/bottom left corners = PREV/NEXT_DOC (i.e., go to the previous
+#   document / undo goto previous document);
+#   on the top/bottom right corners = HISTORY/VLINKS (i.e., call up the history
+#   page or visited links page if on history page).
+# NB if the mouse is defined in this way, it will not be available
+# for copy/paste operations using the clipboard of a desktop manager:
+# for flexibility instead, use the command-line switch  -use_mouse .
+#
+# ncurses and slang have built-in support for the xterm mouse protocol.  In
+# addition, ncurses can be linked with the gpm mouse library, to automatically
+# provide support for this interface in applications such as Lynx.  (Please
+# read the ncurses faq to work around broken gpm configurations packaged by
+# some distributors).  PDCurses implements mouse support for win32 console
+# windows, as does slang.
+#USE_MOUSE:FALSE
+
+.h1 HTML Parsing
+# These settings control the way Lynx parses invalid HTML
+# and how it may resolve such issues.
+
+.h2 COLLAPSE_BR_TAGS
+# If COLLAPSE_BR_TAGS is set FALSE, Lynx will not collapse serial BR tags.
+# If set TRUE, two or more concurrent BRs will be collapsed into a single
+# line break.  Note that the valid way to insert extra blank lines in HTML
+# is via a PRE block with only newlines in the block.
+#
+#COLLAPSE_BR_TAGS:TRUE
+
+.h2 TRIM_BLANK_LINES
+# If TRIM_BLANK_LINES is set FALSE, Lynx will not trim trailing blank lines
+# from the document.  Also, Lynx will not collapse BR-tags onto the previous
+# line when it happens to be empty.
+#TRIM_BLANK_LINES:TRUE
+
+.h2 TAGSOUP
+# If TAGSOUP is set, Lynx uses the "Tag Soup DTD" rather than "SortaSGML".
+# The two approaches differ by the style of error detection and recovery.
+# Tag Soup DTD allows for improperly nested tags; SortaSGML is stricter.
+#TAGSOUP:FALSE
+
+.h1 Cookies
+
+.h2 COOKIE_VERSION
+# Select the RFC cookie version using the RFC number.  Most users will not
+# need to change this, but because RFC 6265 makes incompatible changes versus
+# the older RFCs, it is interesting to compare behavior.
+#
+# For reference:
+.url http://tools.ietf.org/html/rfc6265
+.url http://tools.ietf.org/html/rfc2965
+.url http://tools.ietf.org/html/rfc2109
+#COOKIE_VERSION:RFC-6265
+
+.h2 SET_COOKIES
+# If SET_COOKIES is set FALSE, Lynx will ignore Set-Cookie headers
+# in http server replies.  Note that if a COOKIE_FILE is in use (see
+# below) that contains cookies at startup, Lynx will still send those
+# persistent cookies in requests as appropriate.  Setting SET_COOKIES
+# to FALSE just prevents accepting any new cookies from servers.  To
+# prevent all cookie processing (sending *and* receiving) in a session,
+# make sure that PERSISTENT_COOKIES is not TRUE or that COOKIE_FILE does
+# not point to a file with cookies, in addition to setting SET_COOKIES
+# to FALSE.
+# The default is defined in userdefs.h, and can be overridden here,
+# and/or toggled via the -cookies command line switch.
+#
+SET_COOKIES:TRUE
+
+.h2 ACCEPT_ALL_COOKIES
+# If ACCEPT_ALL_COOKIES is set TRUE, Lynx will accept cookies from all
+# domains with no user interaction.  This is equivalent to automatically
+# replying to all cookie 'Allow?' prompts with 'A'lways.  Note that it
+# does not preempt validity checking, which has to be controlled separately
+# (see below).
+# The default is defined in userdefs.h and can be overridden here, or
+# in the .lynxrc file via an o(ptions) screen setting.  It may also be
+# toggled via the -accept_all_cookies command line switch.
+#
+#ACCEPT_ALL_COOKIES:FALSE
+
+.h2 COOKIE_ACCEPT_DOMAINS
+.h2 COOKIE_REJECT_DOMAINS
+# COOKIE_ACCEPT_DOMAINS and COOKIE_REJECT_DOMAINS are comma-delimited lists
+# of domains from which Lynx should automatically accept or reject cookies
+# without asking for confirmation.  If the same domain is specified in both
+# lists, rejection will take precedence.
+# Note that in order to match cookies, domains have to be spelled out exactly
+# in the form in which they would appear on the Cookie Jar page (case is
+# insignificant).  They are not wildcards.  Domains that apply to more than
+# one host have a leading '.', but have to match *the cookie's* domain
+# exactly.
+#
+#COOKIE_ACCEPT_DOMAINS:
+#COOKIE_REJECT_DOMAINS:
+
+.h2 COOKIE_LOOSE_INVALID_DOMAINS
+.h2 COOKIE_STRICT_INVALID_DOMAINS
+.h2 COOKIE_QUERY_INVALID_DOMAINS
+# COOKIE_LOOSE_INVALID_DOMAINS, COOKIE_STRICT_INVALID_DOMAINS, and
+# COOKIE_QUERY_INVALID_DOMAINS are comma-delimited lists of domains.
+# They control the degree of validity checking that is applied to cookies
+# for the specified domains.
+# Note that in order to match cookies, domains have to be spelled out exactly
+# in the form in which they would appear on the Cookie Jar page (case is
+# insignificant).  They are not wildcards.  Domains that apply to more than
+# one host have a leading '.', but have to match *the cookie's* domain
+# exactly.
+# If a domain is set to strict checking, strict conformance to RFC 2109 will
+# be applied.  A domain with loose checking will be allowed to set cookies
+# with an invalid path or domain attribute.  All domains will default to
+# asking the user for confirmation in case of an invalid path or domain.
+# Cookie validity checking takes place as a separate step before the
+# final decision to accept or reject (see previous options), therefore
+# a cookie that passes validity checking may still be automatically
+# rejected or cause another prompt.
+#
+#COOKIE_LOOSE_INVALID_DOMAINS:
+#COOKIE_STRICT_INVALID_DOMAINS:
+#COOKIE_QUERY_INVALID_DOMAINS:
+
+.h2 MAX_COOKIES_DOMAIN
+.h2 MAX_COOKIES_GLOBAL
+.h2 MAX_COOKIES_BUFFER
+# MAX_COOKIES_DOMAIN,
+# MAX_COOKIES_GLOBAL and
+# MAX_COOKIES_BUFFER are limits on the total number of cookies for each domain,
+# globally, and the per-cookie buffer size.  These limits are by default large
+# enough for reasonable usage; if they are very high, some sites may present
+# undue performance waste.
+#
+#MAX_COOKIES_DOMAIN:50
+#MAX_COOKIES_GLOBAL:500
+#MAX_COOKIES_BUFFER:4096
+
+.h2 PERSISTENT_COOKIES
+# PERSISTENT_COOKIES indicates that cookies should be read at startup from
+# the COOKIE_FILE, and saved at exit for storage between Lynx sessions.
+# It is not used if Lynx was compiled without USE_PERSISTENT_COOKIES.
+# The default is FALSE, so that the feature needs to be enabled here
+# explicitly if you want it.
+#
+PERSISTENT_COOKIES:TRUE
+
+.h2 COOKIE_FILE
+# COOKIE_FILE is the default file from which persistent cookies are read
+# at startup (if the file exists), if Lynx was compiled with
+# USE_PERSISTENT_COOKIES and the PERSISTENT_COOKIES option is enabled.
+# The cookie file can also be specified in .lynxrc or on the command line.
+#
+COOKIE_FILE:~/.config/lynx/cookies
+
+.h2 COOKIE_SAVE_FILE
+# COOKIE_SAVE_FILE is the default file in which persistent cookies are
+# stored at exit, if Lynx was compiled with USE_PERSISTENT_COOKIES and the
+# PERSISTENT_COOKIES option is enabled.  The cookie save file can also be
+# specified on the command line.
+#
+# With an interactive Lynx session, COOKIE_SAVE_FILE will default to
+# COOKIE_FILE if it is not set.  With a non-interactive Lynx session (e.g.,
+# -dump), cookies will only be saved to file if COOKIE_SAVE_FILE is set.
+#
+COOKIE_SAVE_FILE:~/.config/lynx/cookies
+
+.h1 Mail-related
+
+.h2 SYSTEM_MAIL
+.h2 SYSTEM_MAIL_FLAGS
+# VMS:
+# ===
+# The mail command and qualifiers are defined in userdefs.h.  Lynx
+# will spawn a subprocess to send replies and error messages.  The
+# command, and qualifiers (if any), can be re-defined here.  If
+# you use PMDF then headers will we passed via a header file.
+# If you use "generic" VMS MAIL, the subject will be passed on the
+# command line via a /subject="SUBJECT" qualifier, and inclusion
+# of other relevant headers may not be possible.
+# If your mailer uses another syntax, some hacking of the mailform()
+# mailmsg() and reply_by_mail() functions in LYMail.c, and send_file_to_mail()
+# function in LYPrint.c, may be required.
+#
+.ex 2
+#SYSTEM_MAIL:PMDF SEND
+#SYSTEM_MAIL_FLAGS:/headers
+#
+.ex 2
+#SYSTEM_MAIL:MAIL
+#SYSTEM_MAIL_FLAGS:
+#
+# Unix:
+#======
+# The mail path and flags normally are defined for sendmail (or submit
+# with MMDF) in userdefs.h.  You can change them here, but should first
+# read the zillions of CERT advisories about security problems with Unix
+# mailers.
+#
+.ex 2
+#SYSTEM_MAIL:/usr/mmdf/bin/submit
+#SYSTEM_MAIL_FLAGS:-mlruxto,cc\*
+#
+.ex 2
+#SYSTEM_MAIL:/usr/sbin/sendmail
+#SYSTEM_MAIL_FLAGS:-t -oi
+#
+.ex 2
+#SYSTEM_MAIL:/usr/lib/sendmail
+#SYSTEM_MAIL_FLAGS:-t -oi
+#
+# Win32:
+#=======
+# The Win32 port assumes that the mailer cannot read via a pipe.  That is, it
+# must read all information from files.  The "sendmail" utility in the 2.8.1
+# release is able to work with that assumption.  There is no way to tell the
+# Win32 port of Lynx to send its information to the sendmail utility via a
+# pipe.
+#
+# Please read sendmail.txt in the LYNX_W32.ZIP distribution
+.url    https://invisible-island.net/archives/lynx/tarballs/lynx2.8.1_w32.zip
+.url    https://invisible-mirror.net/archives/lynx/tarballs/lynx2.8.1_w32.zip
+#
+# As an alternative, the newer "sendmail for windows" may be useful:
+.url    http://glob.com.au/sendmail/
+#
+# See also BLAT_MAIL and ALT_BLAT_MAIL flags.
+#
+#SYSTEM_MAIL:sendmail -f me@my.host -h my.host -r my.smtp.mailer -m SMTP
+
+.h2 MAIL_ADRS
+# VMS ONLY:
+# ========
+# MAIL_ADRS is defined in userdefs.h and normally is structured for PMDF's
+# IN%"INTERNET_ADDRESS" scheme.  The %s is replaced with the address given
+# by the user.  If you are using a different Internet mail transport, change
+# the IN appropriately (e.g., to SMTP, MX, or WINS).
+#
+#MAIL_ADRS:"IN%%""%s"""
+
+.h2 USE_FIXED_RECORDS
+# VMS ONLY:
+# ========
+# If USE_FIXED_RECORDS is set to TRUE here or in userdefs.h, Lynx will
+# convert 'd'ownloaded binary files to FIXED 512 record format before saving
+# them to disk or acting on a DOWNLOADER option.  If set to FALSE, the
+# headers of such files will indicate that they are Stream_LF with Implied
+# Carriage Control, which is incorrect, and can cause downloading software
+# to get confused and unhappy.  If you do set it FALSE, you can use the
+# FIXED512.COM command file, which is included in this distribution, to do
+# the conversion externally.
+#
+#USE_FIXED_RECORDS:TRUE
+
+.h1 Keyboard Input
+# These settings control the way Lynx interprets user input.
+
+.h2 VI_KEYS_ALWAYS_ON
+.h2 EMACS_KEYS_ALWAYS_ON
+# Vi or Emacs movement keys, i.e. familiar hjkl or ^N^P^F^B .
+# These are defaults, which can be changed in the Options Menu or .lynxrc .
+#VI_KEYS_ALWAYS_ON:FALSE
+#EMACS_KEYS_ALWAYS_ON:FALSE
+
+.h2 DEFAULT_KEYPAD_MODE
+# DEFAULT_KEYPAD_MODE may be set to NUMBERS_AS_ARROWS
+#                                or LINKS_ARE_NOT_NUMBERED (the same)
+#                                or LINKS_ARE_NUMBERED
+#                                or LINKS_AND_FIELDS_ARE_NUMBERED
+#                                or FIELDS_ARE_NUMBERED
+# to specify whether numbers (e.g. [10]) appear next to all links,
+# allowing immediate access by entering the number on the keyboard,
+# or numbers on the numeric key-pad work like arrows;
+# the "FIELDS" options cause form fields also to be numbered.
+# This may be overridden by the keypad_mode setting in .lynxrc,
+# and can also be changed via the Options Menu.
+#
+#DEFAULT_KEYPAD_MODE:NUMBERS_AS_ARROWS
+
+.h2 NUMBER_LINKS_ON_LEFT
+.h2 NUMBER_FIELDS_ON_LEFT
+# Denotes the position for link- and field-numbers (whether it is on the left
+# or right of the anchor).  These are subject to DEFAULT_KEYPAD_MODE, which
+# determines whether numbers are shown.
+#NUMBER_LINKS_ON_LEFT:TRUE
+#NUMBER_FIELDS_ON_LEFT:TRUE
+
+.h2 DEFAULT_KEYPAD_MODE_IS_NUMBERS_AS_ARROWS
+# Obsolete form of DEFAULT_KEYPAD_MODE,
+# numbers work like arrows or numbered links.
+# Set to TRUE, indicates numbers act as arrows,
+# and set to FALSE indicates numbers refer to numbered links on the page.
+# LINKS_AND_FIELDS_ARE_NUMBERED cannot be set by this option because
+# it allows only two values (true and false).
+#
+#DEFAULT_KEYPAD_MODE_IS_NUMBERS_AS_ARROWS:TRUE
+
+.h2 CASE_SENSITIVE_ALWAYS_ON
+# The default search type.
+# This is a default that can be overridden by the user!
+#
+#CASE_SENSITIVE_ALWAYS_ON:FALSE
+
+.h1 Auxiliary Facilities
+
+.h2 DEFAULT_BOOKMARK_FILE
+# DEFAULT_BOOKMARK_FILE is the filename used for storing personal bookmarks.
+# It will be prepended by the user's home directory.
+# NOTE that a file ending in .html or other suffix mapped to text/html
+# should be used to ensure its treatment as HTML.  The built-in default
+# is lynx_bookmarks.html.  On both Unix and VMS, if a subdirectory off of
+# the HOME directory is desired, the path should begin with "./" (e.g.,
+# ./BM/lynx_bookmarks.html), but the subdirectory must already exist.
+# Lynx will create the bookmark file, if it does not already exist, on
+# the first ADD_BOOKMARK attempt if the HOME directory is indicated
+# (i.e., if the definition is just filename.html without any slashes),
+# but requires a pre-existing subdirectory to create the file there.
+# The user can re-define the default bookmark file, as well as a set
+# of sub-bookmark files if multiple bookmark file support is enabled
+# (see below), via the 'o'ptions menu, and can save those definitions
+# in the .lynxrc file.
+#
+#DEFAULT_BOOKMARK_FILE:lynx_bookmarks.html
+
+.h2 MULTI_BOOKMARK_SUPPORT
+# If MULTI_BOOKMARK_SUPPORT is set TRUE, and BLOCK_MULTI_BOOKMARKS (see
+# below) is FALSE, and sub-bookmarks exist, all bookmark operations will
+# first prompt the user to select an active sub-bookmark file or the
+# default bookmark file.  FALSE is the default so that one (the default)
+# bookmark file will be available initially.  The definition here will
+# override that in userdefs.h.  The user can turn on multiple bookmark
+# support via the 'o'ptions menu, and can save that choice as the startup
+# default via the .lynxrc file.  When on, the setting can be STANDARD or
+# ADVANCED.  If SUPPORT is set to the latter, and the user mode also is
+# ADVANCED, the VIEW_BOOKMARK command will invoke a statusline prompt at
+# which the user can enter the letter token (A - Z) of the desired bookmark,
+# or '=' to get a menu of available bookmark files.  The menu always is
+# presented in NOVICE or INTERMEDIATE mode, or if the SUPPORT is set to
+# STANDARD.  No prompting or menu display occurs if only one (the startup
+# default) bookmark file has been defined (define additional ones via the
+# 'o'ptions menu).  The startup default, however set, can be overridden on
+# the command line via the -restrictions=multibook or the -anonymous or
+# -validate switches.
+#
+#MULTI_BOOKMARK_SUPPORT:FALSE
+
+.h2 BLOCK_MULTI_BOOKMARKS
+# If BLOCK_MULTI_BOOKMARKS is set TRUE, multiple bookmark support will
+# be forced off, and cannot to toggled on via the 'o'ptions menu.  The
+# compilation setting is normally FALSE, and can be overridden here.
+# It can also be set via the -restrictions=multibook or the -anonymous
+# or -validate command line switches.
+#
+#BLOCK_MULTI_BOOKMARKS:FALSE
+
+.h1 Interaction
+
+.h2 DEFAULT_USER_MODE
+# DEFAULT_USER_MODE sets the default user mode for Lynx users.
+# NOVICE shows a three line help message at the bottom of the screen.
+# INTERMEDIATE shows normal amount of help (one line).
+# ADVANCED help is replaced by the URL of the current link.
+#
+#DEFAULT_USER_MODE:NOVICE
+
+.h1 External Programs
+
+.h2 DEFAULT_EDITOR
+# If DEFAULT_EDITOR is defined, users may edit local documents with it
+# & it will also be used for sending mail messages.
+# If no editor is defined here or by the user,
+# the user will not be able to edit local documents
+# and a primitive line-oriented mail-input mode will be used.
+#
+# For sysadmins: do not define a default editor
+# unless you know EVERY user will know how to use it;
+# users can easily define their own editor in the Options Menu.
+#
+#DEFAULT_EDITOR:
+
+.h2 SYSTEM_EDITOR
+# SYSTEM_EDITOR behaves the same as DEFAULT_EDITOR,
+# except that it can't be changed by users.
+#
+#SYSTEM_EDITOR:
+
+.h3 POSITIONABLE_EDITOR
+# If POSITIONABLE_EDITOR is defined once or multiple times and if the same
+# editor is used as editor in lynx, lynx will use its features, i.e., adding an
+# option to set the initial line-position, when editing files and textarea.
+# The commented editors below are already known; there is no need to uncomment
+# them.
+#
+#POSITIONABLE_EDITOR:emacs
+#POSITIONABLE_EDITOR:jed
+#POSITIONABLE_EDITOR:jmacs
+#POSITIONABLE_EDITOR:joe
+#POSITIONABLE_EDITOR:jove
+#POSITIONABLE_EDITOR:jpico
+#POSITIONABLE_EDITOR:jstar
+#POSITIONABLE_EDITOR:nano
+#POSITIONABLE_EDITOR:pico
+#POSITIONABLE_EDITOR:rjoe
+#POSITIONABLE_EDITOR:vi
+
+.h1 Proxy
+
+.h2 HTTP_PROXY
+.h2 HTTPS_PROXY
+.h2 FTP_PROXY
+.h2 GOPHER_PROXY
+.h2 NEWSPOST_PROXY
+.h2 NEWSREPLY_PROXY
+.h2 NEWS_PROXY
+.h2 NNTP_PROXY
+.h2 SNEWSPOST_PROXY
+.h2 SNEWSREPLY_PROXY
+.h2 SNEWS_PROXY
+.h2 WAIS_PROXY
+.h2 FINGER_PROXY
+.h2 CSO_PROXY
+# Lynx version 2.2 and beyond supports the use of proxy servers that can act as
+# firewall gateways and caching servers.  They are preferable to the older
+# gateway servers.  Each protocol used by Lynx can be mapped separately using
+# PROTOCOL_proxy environment variables (see Lynx Users Guide).  If you have not set
+# them externally, you can set them at run time via this configuration file.
+# They will not override external settings.  The no_proxy variable can be used
+# to inhibit proxying to selected regions of the Web (see below).  Note that on
+# VMS these proxy variables are set as process logicals rather than symbols, to
+# preserve lowercasing, and will outlive the Lynx image.
+#
+.ex 15
+#http_proxy:http://some.server.dom:port/
+#https_proxy:http://some.server.dom:port/
+#ftp_proxy:http://some.server.dom:port/
+#gopher_proxy:http://some.server.dom:port/
+#news_proxy:http://some.server.dom:port/
+#newspost_proxy:http://some.server.dom:port/
+#newsreply_proxy:http://some.server.dom:port/
+#snews_proxy:http://some.server.dom:port/
+#snewspost_proxy:http://some.server.dom:port/
+#snewsreply_proxy:http://some.server.dom:port/
+#nntp_proxy:http://some.server.dom:port/
+#wais_proxy:http://some.server.dom:port/
+#finger_proxy:http://some.server.dom:port/
+#cso_proxy:http://some.server.dom:port/
+#no_proxy:host.domain.dom
+
+.h2 NO_PROXY
+# The no_proxy variable can be a comma-separated list of strings defining
+# no-proxy zones in the DNS domain name space.  If a tail substring of the
+# domain-path for a host matches one of these strings, transactions with that
+# node will not be proxied.
+.ex
+#no_proxy:domain.path1,path2
+#
+# A single asterisk as an entry will override all proxy variables and no
+# transactions will be proxied.
+.ex
+#no_proxy:*
+# This is the only allowed use of * in no_proxy.
+#
+# Warning:  Note that setting 'il' as an entry in this list will block proxying
+# for the .mil domain as well as the .il domain.  If the entry is '.il' this
+# will not happen.
+
+.h1 External Programs
+
+.h2 PRINTER
+.h2 DOWNLOADER
+.h2 UPLOADER
+# PRINTER, DOWNLOADER & UPLOADER DEFINITIONS:
+# Lynx has 4 pre-defined print options & 1 pre-defined download option,
+# which are called up on-screen when `p' or `d' are entered;
+# any number of options can be added by the user, as explained below.
+# Uploaders can be defined only for UNIX with DIRED_SUPPORT:
+# see the Makefile in the top directory & the header of src/LYUpload.c .
+#
+# For `p' pre-defined options are: `Save to local file', `E-mail the file',
+# `Print to screen' and `Print to local printer attached to vt100'.
+# `Print to screen' allows file transfers in the absence of alternatives
+# and is often the only option allowed here for anonymous users;
+# the 3rd & 4th options are not pre-defined for DOS/WINDOWS versions of Lynx.
+# For `d' the pre-defined option is: `Download to local file'.
+#
+# To define your own print or download option use the following formats:
+#
+# PRINTER:<name>:<command>:<option>:<lines/page>[:<environment>]
+#
+# DOWNLOADER:<name>:<command>:<option>[:<environment>]
+#
+# <name>       is what you will see on the print/download screen.
+#
+# <command>    is the command your system will execute:
+#              the 1st %s in the command will be replaced
+#              by the temporary filename used by Lynx;
+#              a 2nd %s will be replaced by a filename of your choice,
+#              for which Lynx will prompt, offering a suggestion.
+#              On Unix, which has pipes, you may use a '|' as the first
+#              character of the command, and Lynx will open a pipe to
+#              the command.
+#              If the command format of your printer/downloader requires
+#              a different layout, you will need to use a script
+#              (see the last 2 download examples below).
+#
+# <option>     TRUE : the printer/downloader will always be ENABLED,
+#              except that downloading is disabled when -validate is used;
+#              FALSE : both will be DISABLED for anonymous users
+#              and printing will be disabled when -noprint is used.
+#
+# <lines/page> (printers: optional) the number of lines/page (default 66):
+#              used to compute the approximate output size
+#              and prompt if the document is > 4 printer pages;
+#              it uses current screen length for the computation
+#              when `Print to screen' is selected.
+#
+# [:<environment>]
+#              optional, if XWINDOWS then printer/downloader will be
+#              enabled if DISPLAY environment variable IS defined and
+#              disabled otherwise, if environment is NON_XWINDOWS
+#              then printer/downloader will be enabled if DISPLAY
+#              environment variable IS NOT defined and disabled otherwise,
+#              for anything else or if environment is not specified
+#              printer/downloader is always enabled.
+#
+# You must put the whole definition on one line;
+# if you use a colon, precede it with a backslash.
+#
+# `Printer' can be any file-handling program you find useful,
+# even if it does not physically print anything.
+#
+# Usually, down/up-loading involves the use of (e.g.) Ckermit or ZModem
+# to transfer files to a user's local machine over a serial link,
+# but download options do not have to be download-protocol programs.
+#
+# Printer examples:
+.ex 3
+#PRINTER:Computer Center printer:lpr -Pccprt %s:FALSE
+#PRINTER:Office printer:lpr -POffprt %s:TRUE
+#PRINTER:VMS printer:print /queue=cc$print %s:FALSE:58
+# If you have a very busy VMS print queue
+# and Lynx deletes the temporary files before they have been queued,
+# use the VMSPrint.com included in the distribution:
+.ex
+#PRINTER:Busy VMS printer:@Lynx_Dir\:VMSPrint sys$print %s:FALSE:58
+# To specify a print option at run-time:
+# NBB if you have ANONYMOUS users, DO NOT allow this option!
+.ex
+#PRINTER:Specify at run-time:echo -n "Enter a print command\: "; read word; sh -c "$word %s":FALSE
+# To pass to a sophisticated file viewer: -k suppresses invocation
+# of hex display mode if 8-bit or control characters are present;
+# +s invokes secure mode (see ftp://space.mit.edu/pub/davis/most):
+.ex
+#PRINTER:Use Most to view:most -k +s %s:TRUE:23
+#
+# Downloader examples:
+# in Kermit, -s %s is the filename sent, -a %s the filename on arrival
+# (if they are given in reverse order here, the command will fail):
+.ex
+#DOWNLOADER:Use Kermit to download to the terminal:kermit -i -s %s -a %s:TRUE
+# NB don't use -k with Most, so that binaries will invoke hexadecimal mode:
+.ex
+#DOWNLOADER:Use Most to view:most +s %s:TRUE
+# The following example gives wrong filenames
+# (`sz' doesn't support a suggested filename parameter):
+.ex
+#DOWNLOADER:Use Zmodem to download to the local terminal:sz %s:TRUE
+# The following example returns correct filenames
+# by using a script to make a subdirectory in /tmp,
+# but may conflict with very strong security or permissions restrictions:
+.ex
+#DOWNLOADER:Use Zmodem to download to the local terminal:set %s %s;td=/tmp/Lsz$$;mkdir $td;ln -s $1 $td/"$2";sz $td/"$2";rm -r $td:TRUE
+.ex 2
+#UPLOADER:Use Kermit to upload from your computer: kermit -i -r -a %s:TRUE
+#UPLOADER:Use Zmodem to upload from your computer: rz %s:TRUE
+#
+# Note for OS/390: /* S/390 -- gil -- 1464 */
+# The following is strongly recommended to undo ASCII->EBCDIC conversion.
+.ex
+#DOWNLOADER:Save OS/390 binary file: iconv -f IBM-1047 -t ISO8859-1 %s >%s:FALSE
+
+# Added by Red Hat:
+DOWNLOADER:View with less:less %s:TRUE
+
+.h1 Interaction
+
+.h2 NO_DOT_FILES
+# If NO_DOT_FILES is TRUE (normal default via userdefs.h), the user will not
+# be allowed to specify files beginning with a dot in reply to output filename
+# prompts, and files beginning with a dot (e.g., file://localhost/path/.lynxrc)
+# will not be included in the directory browser's listings.  If set FALSE, you
+# can force it to be treated as TRUE via -restrictions=dotfiles.  If set FALSE
+# and not forced TRUE, the user can regulate it via the 'o'ptions menu (and
+# may save the preference in the RC file).
+#
+#NO_DOT_FILES:TRUE
+
+.h1 Internal Behavior
+
+.h2 NO_FROM_HEADER
+# If NO_FROM_HEADER is set FALSE, From headers will be sent in transmissions
+# to http or https servers if the personal_mail_address has been defined via
+# the 'o'ptions menu.  The compilation default is TRUE (no From header is
+# sent) and the default can be changed here.  The default can be toggled at
+# run time via the -from switch.  Note that transmissions of From headers
+# have become widely considered to create an invasion of privacy risk.
+#
+#NO_FROM_HEADER:TRUE
+
+.h2 NO_REFERER_HEADER
+# If NO_REFERER_HEADER is TRUE, Referer headers never will be sent in
+# transmissions to servers.  Lynx normally sends the URL of the document
+# from which the link was derived, but not for startfile URLs, 'g'oto
+# URLs, 'j'ump shortcuts, bookmark file links, history list links, or
+# URLs that include the content from form submissions with method GET.
+# If left FALSE here, it can be set TRUE at run time via the -noreferer
+# switch.
+#
+#NO_REFERER_HEADER:FALSE
+
+.h1 Internal Behavior
+
+.h2 NO_FILE_REFERER
+# If NO_FILE_REFERER is TRUE, Referer headers never will be sent in
+# transmissions to servers for links or actions derived from documents
+# or forms with file URLs.  This ensures that paths associated with
+# the local file system are never indicated to servers, even if
+# NO_REFERER_HEADER is FALSE.  If set to FALSE here, it can still be
+# set TRUE at run time via the -nofilereferer switch.
+#
+#NO_FILE_REFERER:TRUE
+
+.h2 REFERER_WITH_QUERY
+# REFERER_WITH_QUERY controls what happens when the URL in a Referer
+# header to be sent would contain a query part in the form of a '?'
+# character followed by one or more attribute=value pairs.  Query parts
+# often contain sensitive or personal information resulting from filling
+# out forms, or other info that allows tracking of a user's browsing path
+# through a site, an thus should not be put in a Referer header (which may
+# get sent to an unrelated third-party site).  On the other hand, some
+# sites (improperly) rely on browsers sending Referer headers, even when
+# the user is coming from a page whose URL has a query part.
+#
+# If REFERER_WITH_QUERY is SEND, full Referer headers will be sent
+# including the query part (unless sending of Referer is disabled in
+# general, see NO_REFERER_HEADER above).  If REFERER_WITH_QUERY is
+# PARTIAL, the Referer header will contain a partial URL, with the query
+# part stripped off.  This is not strictly correct, but should satisfy
+# those sites that check only whether the user arrived at a page from an
+# "outside" link.  If REFERER_WITH_QUERY is set to DROP (or anything else
+# unrecognized), the default, no Referer header is sent at all in this
+# situation.
+#
+#REFERER_WITH_QUERY:DROP
+
+.h1 Appearance
+
+.h2 VERBOSE_IMAGES
+# VERBOSE_IMAGES controls whether Lynx replaces [LINK], [INLINE] and [IMAGE]
+# (for images without ALT) with filenames of these images.
+# This can be useful in determining what images are important
+# and which are mere decorations, e.g. button.gif, line.gif,
+# provided the author uses meaningful names.
+#
+# The definition here will override the setting in userdefs.h.
+#
+#VERBOSE_IMAGES:TRUE
+
+.h2 MAKE_LINKS_FOR_ALL_IMAGES
+# If MAKE_LINKS_FOR_ALL_IMAGES is TRUE, all images will be given links
+# which can be ACTIVATEd.  For inlines, the ALT or pseudo-ALT ("[INLINE]")
+# strings will be links for the resolved SRC rather than just text.
+# For ISMAP or other graphic links, ALT or pseudo-ALT ("[ISMAP]" or "[LINK]")
+# will have '-' and a link labeled "[IMAGE]" for the resolved SRC appended.
+# See also VERBOSE_IMAGES flag.
+#
+# The definition here will override that in userdefs.h
+# and can be toggled via an "-image_links" command-line switch.
+# The user can also use the LYK_IMAGE_TOGGLE key (default `*')
+# or `Show Images' in the Form-based Options Menu.
+#
+#MAKE_LINKS_FOR_ALL_IMAGES:FALSE
+
+.h2 MAKE_PSEUDO_ALTS_FOR_INLINES
+# If MAKE_PSEUDO_ALTS_FOR_INLINES is FALSE, inline images which don't specify
+# an ALT string will not have "[INLINE]" inserted as a pseudo-ALT,
+# i.e. they'll be treated as having ALT="".
+# Otherwise (if TRUE), pseudo-ALTs will be created for inlines,
+# so that they can be used as links to the SRCs.
+# See also VERBOSE_IMAGES flag.
+#
+# The definition here will override that in userdefs.h
+# and can be toggled via a "-pseudo_inlines" command-line switch.
+# The user can also use the LYK_INLINE_TOGGLE key (default `[')
+# or `Show Images' in the Form-based Options Menu.
+#
+#MAKE_PSEUDO_ALTS_FOR_INLINES:TRUE
+
+.h2 SUBSTITUTE_UNDERSCORES
+# If SUBSTITUTE_UNDERSCORES is TRUE, the _underline_ format will be used
+# for emphasis tags in dumps.
+#
+# The default defined here will override that in userdefs.h, and the user
+# can toggle the default via a "-underscore" command line switch.
+#
+#SUBSTITUTE_UNDERSCORES:FALSE
+
+.h1 Interaction
+
+.h2 QUIT_DEFAULT_YES
+# If QUIT_DEFAULT_YES is TRUE then when the QUIT command is entered, any
+# response other than n or N will confirm.  It should be FALSE if you
+# prefer the more conservative action of requiring an explicit Y or y to
+# confirm.  The default defined here will override that in userdefs.h.
+#
+#QUIT_DEFAULT_YES:TRUE
+
+.h1 HTML Parsing
+
+.h2 HISTORICAL_COMMENTS
+# If HISTORICAL_COMMENTS is TRUE, Lynx will revert to the "Historical"
+# behavior of treating any '>' as a terminator for comments, instead of
+# seeking a valid '-->' terminator (note that white space can be present
+# between the '--' and '>' in valid terminators).  The compilation default
+# is FALSE.
+#
+# The compilation default, or default defined here, can be toggled via a
+# "-historical" command line switch, and via the LYK_HISTORICAL command key.
+#
+#HISTORICAL_COMMENTS:FALSE
+
+.h2 MINIMAL_COMMENTS
+# If MINIMAL_COMMENTS is TRUE, Lynx will not use Valid comment parsing
+# of '--' pairs as serial comments within an overall comment element,
+# and instead will seek only a '-->' terminator for the overall comment
+# element.  This emulates the Netscape v2.0 comment parsing bug, and
+# will help Lynx cope with the use of dashes as "decorations", which
+# consequently has become common in so-called "Enhanced for Netscape"
+# pages.  Note that setting Historical comments on will override the
+# Minimal or Valid setting.
+#
+# The compilation default for MINIMAL_COMMENTS is FALSE, but we'll
+# set it TRUE here, until Netscape gets its comment parsing right,
+# and "decorative" dashes cease to be so common.
+#
+# The compilation default, or default defined here, can be toggled via a
+# "-minimal" command line switch, and via the LYK_MINIMAL command key.
+#
+MINIMAL_COMMENTS:TRUE
+
+.h2 SOFT_DQUOTES
+# If SOFT_DQUOTES is TRUE, Lynx will emulate the invalid behavior of
+# treating '>' as a co-terminator of a double-quoted attribute value
+# and the tag which contains it, as was done in old versions of Netscape
+# and Mosaic.  The compilation default is FALSE.
+#
+# The compilation default, or default defined here, can be toggled via
+# a "-soft_dquotes" command line switch.
+#
+#SOFT_DQUOTES:FALSE
+
+.h2 STRIP_DOTDOT_URLS
+# If STRIP_DOTDOT_URLS is TRUE, Lynx emulates the invalid behavior of many
+# browsers to strip a leading "../" segment from relative URLs in HTML
+# documents with a http or https base URL, if this would otherwise lead to
+# an absolute URLs with those characters still in it.  Such URLs are normally
+# erroneous and not what is intended by page authors.  Lynx will issue
+# a warning message when this occurs.
+#
+# If STRIP_DOTDOT_URLS is FALSE, Lynx will use those URLs for requests
+# without taking any special actions or issuing Warnings, in most cases
+# this will result in an error response from the server.
+#
+# Note that Lynx never tries to fix similar URLs for protocols other than
+# http and https, since they are less common and may actually be valid in
+# some cases.
+#
+#STRIP_DOTDOT_URLS:TRUE
+
+.h1 Appearance
+
+.h2 ENABLE_SCROLLBACK
+# If ENABLE_SCROLLBACK is TRUE, Lynx will clear the entire screen before
+# displaying each new screenful of text.  Though less efficient for normal
+# use, this allows programs that maintain a buffer of previously-displayed
+# text to recognize the continuity of what has been displayed, so that
+# previous screenfuls can be reviewed by whatever method the program uses
+# to scroll back through previous text.  For example, the PC comm program
+# QModem has a key that can be pressed to scroll back; if ENABLE_SCROLLBACK
+# is TRUE, pressing the scrollback key will access previous screenfuls which
+# will have been stored on the local PC and will therefore be displayed
+# instantaneously, instead of needing to be retransmitted by Lynx at the
+# speed of the comm connection (but Lynx will not know about the change,
+# so you must restore the last screen before resuming with Lynx commands).
+#
+# The default compilation or configuration setting can be toggled via an
+# "-enable_scrollback" command line switch.
+#
+#ENABLE_SCROLLBACK:FALSE
+
+.h2 SCAN_FOR_BURIED_NEWS_REFS
+# If SCAN_FOR_BURIED_NEWS_REFS is set to TRUE, Lynx will scan the bodies
+# of news articles for buried article and URL references and convert them
+# to links.  The compilation default is TRUE, but some email addresses
+# enclosed in angle brackets ("<user@address>") might be converted to false
+# news links, and uuencoded messages might be corrupted.  The conversion is
+# not done when the display is toggled to source or when 'd'ownloading, so
+# uuencoded articles can be saved intact regardless of these settings.
+#
+# The default setting can be toggled via a "-buried_news" command line
+# switch.
+#
+#SCAN_FOR_BURIED_NEWS_REFS:TRUE
+
+.h2 PREPEND_BASE_TO_SOURCE
+# If PREPEND_BASE_TO_SOURCE is set to FALSE, Lynx will not prepend a
+# Request URL comment and BASE element to text/html source files when
+# they are retrieved for 'd'ownloading or passed to 'p'rint functions.
+# The compilation default is TRUE.  Note that this prepending is not
+# done for -source dumps, unless the -base switch also was included on
+# the command line, and the latter switch overrides the setting of the
+# PREPEND_BASE_TO_SOURCE configuration variable.
+#
+#PREPEND_BASE_TO_SOURCE:TRUE
+
+.h1 External Programs
+# MIME types and viewers!
+#
+# file extensions may be assigned to MIME types using
+# the SUFFIX: definition.
+#
+# NOTE: It is normally preferable to define new extension mappings in
+#       EXTENSION_MAP files (see below) instead of here:  Definitions
+#       here are overridden by those in EXTENSION_MAP files and even by
+#       some built-in defaults in src/HTInit.c.  On the other hand,
+#       definitions here allow some more fields that are not possible
+#       in those files.
+#
+#       Extension mappings have an effect mostly for ftp and local files,
+#       they are NOT used to determine the type of content for URLs with
+#       the http protocol.  This is because HTTP servers already specify
+#       the MIME type in the Content-Type header.  [It may still be
+#       necessary to set up an appropriate suffix for some MIME types,
+#       even if they are accessed only via the HTTP protocol, if the viewer
+#       (see below) for those MIME types requires a certain suffix for the
+#       temporary file passed to it.]
+
+.h2 GLOBAL_EXTENSION_MAP
+.h2 PERSONAL_EXTENSION_MAP
+# The global and personal EXTENSION_MAP files allow you to assign extensions
+# to MIME types which will override any of the suffix maps in this (lynx.cfg)
+# configuration file, or in src/HTInit.c.  See the example mime.types file
+# in the samples subdirectory.
+#
+# Unix:
+# ====
+#GLOBAL_EXTENSION_MAP:/usr/local/lib/mosaic/mime.types
+# VMS:
+# ===
+#GLOBAL_EXTENSION_MAP:Lynx_Dir:mime.types
+#
+#       Unix (sought in user's home directory):
+#PERSONAL_EXTENSION_MAP:.mime.types
+#       VMS (sought in user's sys$login directory):
+#PERSONAL_EXTENSION_MAP:mime.types
+
+.h2 SUFFIX_ORDER
+# With SUFFIX_ORDER the precedence of suffix mappings can be changed.
+# Two kinds of settings are recognized:
+#
+#    PRECEDENCE_OTHER or PRECEDENCE_HERE
+#      Suffix mappings can come from four sources: (1) SUFFIX rules
+#      given here - see below, (2) built-in defaults (HTInit.c), and the
+#      (3) GLOBAL_EXTENSION_MAP and (4) PERSONAL_EXTENSION_MAP files.
+#      The order of precedence is normally as listed: (1) has the
+#      *lowest*, (4) has the *highest* precedence if there are conflicts.
+#      In other words, SUFFIX mappings here are overridden by conflicting
+#      ones elsewhere.  This default ordering is called PRECEDENCE_OTHER.
+#      With PRECEDENCE_HERE, the order becomes (2) (3) (4) (1), i.e.
+#      mappings here override others made elsewhere.
+#
+#    NO_BUILTIN
+#      This disables all built-in default rules.  In other words, (2) in the
+#      list above is skipped.  Some recognition for compressed files (".gz",
+#      ".Z") is still hardwired.   A mapping for some basic types, at least
+#      for text/html is probably necessary to get a usable configuration,
+#      it can be given in a SUFFIX rule below or an extension map file.
+# Both kinds of settings can be combined, separated by comma as in
+#        SUFFIX_ORDER:PRECEDENCE_HERE,NO_BUILTIN
+# Note: Using PRECEDENCE_HERE has only an effect on SUFFIX rules that follow.
+# Moreover, if GLOBAL_EXTENSION_MAP or PERSONAL_EXTENSION_MAP directives
+# are used, they should come *before* a SUFFIX_ORDER:PRECEDENCE_HERE.
+#
+#SUFFIX_ORDER:PRECEDENCE_OTHER
+
+.h2 SUFFIX
+# The SUFFIX definition takes the form of:
+#
+#    SUFFIX:<file extension>:<mime type>:<encoding>:<quality>:<description>
+#
+# All fields after <mime type> are optional (including the separators
+# if no more fields follow).
+#
+#     <file extension> trailing end of file name.  This need not strictly
+#                      be a file extension as understood by the OS, a dot
+#                      has to be given explicitly if it is indented, for
+#                      some uses one could even match full filenames here.
+#                      In addition, two forms are special: "*.*" and "*"
+#                      refer to the defaults for otherwise unmatched files
+#                      (the first for filenames with a dot somewhere in
+#                      the name, the second without), these are currently
+#                      mapped to text/plain in the (HTInit.c) built-in code.
+#                      Lynx compares the file-extensions ignoring case.
+#
+#     <mime type> a MIME content type.  It can also contain a charset
+#                 parameter, see example below.  This should be given in
+#                 all lowercase, use <description> for more fancy labels.
+#                 It can be left empty if an HTTP style encoding is given.
+#
+# Fields in addition to the usual ones are
+#
+#     <encoding>  either a mail style trivial encoding (7bit, 8bit, binary)
+#                 which could be used on some systems to determine how to
+#                 open local files (currently it isn't), and is used to
+#                 determine transfer mode for some FTP URLs; or a HTTP style
+#                 content encoding (gzip (equivalent to x-gzip), compress)
+#
+#     <quality> a floating point quality factor, usually between 0.0 and 1.0
+#               currently unused in most situations.
+#
+#     <description> text that can appear in FTP directory listings, and in
+#                   local directory listings (see LIST_FORMAT, code %t)
+#
+# For instance the following definition maps the
+# extension ".gif" to the mime type "image/gif"
+.ex
+#    SUFFIX:.gif:image/gif
+#
+# The following can be used if you have a convention to label
+# HTML files in some character set that differs from your local
+# default (see also ASSUME_LOCAL_CHARSET) with a different
+# extension, here ".html-u8".  It also demonstrates use of the
+# description field, note extra separators for omitted fields:
+.ex
+#    SUFFIX:.html-u8:text/html;charset=utf-8:::UTF-8 HTML
+#
+# The following shows how a suffix can indicate a combination
+# of MIME type and compression method. (The ending ".ps.gz" should
+# already be recognized by default; the form below could be used on
+# systems that don't allow more than one dot in filenames.)
+.ex
+#    SUFFIX:.ps_gz:application/postscript:gzip::gzip'd Postscript
+#
+# The following is meant to match a full filename (but can match
+# any file ending in "core", so be careful):
+.ex
+#    SUFFIX:core:application/x-core-file
+#
+# file suffixes are case INsensitive!
+#
+# The suffix definitions listed here in the default lynx.cfg file are
+# similar to those normally established via src/HTInit.c.  You can change
+# the defaults by editing that file or disable them, or via the global or
+# personal mime.types files at run time (except for the additional fields).
+# Assignments made here are overridden by entries in those files
+# unless preceded with a SUFFIX_ORDER:PRECEDENCE_HERE.
+#
+.ex 29
+#SUFFIX:.ps:application/postscript
+#SUFFIX:.eps:application/postscript
+#SUFFIX:.ai:application/postscript
+#SUFFIX:.rtf:application/rtf
+#SUFFIX:.snd:audio/basic
+#SUFFIX:.gif:image/gif
+#SUFFIX:.rgb:image/x-rgb
+#SUFFIX:.png:image/png
+#SUFFIX:.xbm:image/x-xbitmap
+#SUFFIX:.tiff:image/tiff
+#SUFFIX:.jpg:image/jpeg
+#SUFFIX:.jpeg:image/jpeg
+#SUFFIX:.mpg:video/mpeg
+#SUFFIX:.mpeg:video/mpeg
+#SUFFIX:.mov:video/quicktime
+#SUFFIX:.hqx:application/mac-binhex40
+#SUFFIX:.bin:application/octet-stream
+#SUFFIX:.exe:application/octet-stream
+#SUFFIX:.tar:application/x-tar
+#SUFFIX:.tgz:application/x-tar:gzip
+#SUFFIX:.Z::compress
+#SUFFIX:.gz::gzip
+#SUFFIX:.bz2:application/x-bzip2
+#SUFFIX:.zip:application/zip
+#SUFFIX:.lzh:application/x-lzh
+#SUFFIX:.lha:application/x-lha
+#SUFFIX:.dms:application/x-dms
+#SUFFIX:.html:text/html
+#SUFFIX:.txt:text/plain
+
+.h2 XLOADIMAGE_COMMAND
+# VMS:
+# ====
+# XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c
+# for viewing image content types when the DECW$DISPLAY logical
+# is set.  Make it the foreign command for your system's X image
+# viewer (commonly, "xv").  It can be anything that will handle GIF,
+# TIFF and other popular image formats.  Freeware ports of xv for
+# VMS were available in the ftp://ftp.wku.edu/vms/unsupported and
+# http://www.openvms.digital.com/cd/XV310A/ subdirectories.  You
+# must also have a "%s" for the filename.  The default is defined
+# in userdefs.h and can be overridden here, or via the global or
+# personal mailcap files (see below).
+#
+# Make this empty (but not commented out) if you don't have such a viewer or
+# want to disable the built-in default viewer mappings for image types.
+#
+#XLOADIMAGE_COMMAND:xv %s
+#
+# Unix:
+# =====
+# XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c for
+# viewing image content types when the DISPLAY environment variable
+# is set.  Make it the full path and name of the xli (also know as
+# xloadimage or xview) command, or other image viewer.  It can be
+# anything that will handle GIF, TIFF and other popular image formats
+# (xli does).  The freeware distribution of xli is available in the
+# ftp://ftp.x.org/contrib subdirectory.  The shareware, xv, also is
+# suitable.  You must also have a "%s" for the filename; "&" for
+# background is optional.  The default is defined in userdefs.h and can be
+# overridden here, or via the global or personal mailcap files (see below).
+# Make this empty (but not commented out) if you don't have such a
+# viewer or don't want to disable the built-in default viewer
+# mappings for image types.
+# Note that open is used as the default for NeXT, instead of the
+# XLOADIMAGE_COMMAND definition.
+# If you use xli, you may want to add the -quiet flag.
+#
+#XLOADIMAGE_COMMAND:xli %s &
+
+.h2 VIEWER
+# MIME types may be assigned to external viewers using
+# the VIEWER definition.
+#
+# NOTE: if you do not define a viewer to a new MIME type
+#       that you assigned above then it will be saved to
+#       disk by default.
+#       It is normally preferable to define new viewers in
+#       MAILCAP files (see below) instead of here:  Definitions
+#       here are overridden by those in MAILCAP files and even
+#       by some built-in defaults in src/HTInit.c.
+#
+# The VIEWER definition takes the form of:
+#    VIEWER:<mime type>:<viewer command>[:<environment>]
+#      where -mime type is the MIME content type of the file
+#            -viewer command is a system command that can be
+#             used to display the file where %s is replaced
+#             within the command with the physical filename
+#             (e.g., "ghostview %s" becomes "ghostview /tmp/temppsfile")
+#            -environment is optional.  The only valid keywords
+#             are currently XWINDOWS and NON_XWINDOWS.  If the XWINDOWS
+#             environment is specified then the viewer will only be
+#             defined when the user has the environment variable DISPLAY
+#             (DECW$DISPLAY on VMS) defined.  If the NON_XWINDOWS environment
+#             is specified the specified viewer will only be defined when the
+#             user DOES NOT have the environment variable DISPLAY defined.
+#  examples:
+#               VIEWER:image/gif:xli %s:XWINDOWS
+#               VIEWER:image/gif:ascii-view %s:NON_XWINDOWS
+#               VIEWER:application/start-elm:elm
+#
+# You must put the whole definition on one line.
+#
+# If you must use a colon in the viewer command, precede it with a backslash!
+#
+# The MIME_type:viewer:XWINDOWS definitions listed here in the lynx.cfg
+# file are among those established via src/HTInit.c.  For the image types,
+# HTInit.c uses the XLOADIMAGE_COMMAND definition in userdefs.h or above
+# (open is used for NeXT).  You can change any of these defaults via the
+# global or personal mailcap files.  Assignments made here will be overridden
+# by entries in those files.
+#
+.ex 7
+#VIEWER:application/postscript:ghostview %s&:XWINDOWS
+#VIEWER:image/gif:xli %s&:XWINDOWS
+#VIEWER:image/x-xbm:xli %s&:XWINDOWS
+#VIEWER:image/png:xli %s&:XWINDOWS
+#VIEWER:image/tiff:xli %s&:XWINDOWS
+#VIEWER:image/jpeg:xli %s&:XWINDOWS
+#VIEWER:video/mpeg:mpeg_play %s &:XWINDOWS
+
+.h2 GLOBAL_MAILCAP
+.h2 PERSONAL_MAILCAP
+# The global and personal MAILCAP files allow you to specify external
+# viewers to be spawned when Lynx encounters different MIME types, which
+# will override any of the suffix maps in this (lynx.cfg) configuration
+# file, or in src/HTInit.c.  See
+.url http://tools.ietf.org/html/rfc1524
+# and the example mailcap file in the samples subdirectory.
+#
+# Unix:
+# ====
+#GLOBAL_MAILCAP:/usr/local/lib/mosaic/mailcap
+# VMS:
+# ===
+#GLOBAL_MAILCAP:Lynx_Dir:mailcap
+#
+#       Sought in user's home (Unix) or sys$login (VMS) directory.
+#PERSONAL_MAILCAP:.mailcap
+
+.h2 PREFERRED_MEDIA_TYPES
+# When doing a GET, lynx lists the MIME types which it knows how to present
+# (the "Accept:" string).  Depending on your system configuration, the
+# mime.types or other data given by the GLOBAL_EXTENSION_MAP may include many
+# entries that lynx really does not handle.  Use this option to select one
+# of the built-in subsets of the MIME types that lynx could list in the
+# Accept.
+#
+# Values for this option are keywords:
+#       INTERNAL        lynx's built-in types for internal conversions
+#       CONFIGFILE      adds lynx.cfg
+#       USER            adds PERSONAL_EXTENSION_MAP settings
+#       SYSTEM          adds GLOBAL_EXTENSION_MAP  settings
+#       ALL             adds lynx's built-in types for external conversions
+#
+#PREFERRED_MEDIA_TYPES:internal
+
+.h2 PREFERRED_ENCODING
+# When doing a GET, lynx tells what types of compressed data it can decompress
+# (the "Accept-Encoding:" string).  This is determined by compiled-in support
+# for decompression or external decompression programs.
+#
+# Values for this option are keywords:
+#       NONE            Do not request compressed data
+#       GZIP            For gzip
+#       COMPRESS        For compress
+#       BZIP2           For bzip2
+#       BROTLI          For brotli
+#       ALL             All of the above.
+#PREFERRED_ENCODING:all
+
+.h2 PREFERRED_CONTENT_TYPE
+# When doing a GET, lynx expects the server to provide a Content-Type, i.e.,
+# the MIME name which tells it how to present data.  When that is missing
+# lynx uses this value.
+#PREFERRED_CONTENT_TYPE: text/plain
+
+.h1 Keyboard Input
+
+.h2 KEYBOARD_LAYOUT
+# If your terminal (or terminal emulator, or operating system) does not
+# support 8-bit input (at all or in easy way), you can use Lynx to
+# generate 8-bit characters from 7-bit ones output by terminal.
+#
+# Currently available keyboard layouts:
+#       ROT13'd keyboard layout
+#       JCUKEN Cyrillic, for AT 101-key kbd
+#       YAWERTY Cyrillic, for DEC LK201 kbd
+#
+# This feature is ifdef'd with EXP_KEYBOARD_LAYOUT.
+#KEYBOARD_LAYOUT:JCUKEN Cyrillic, for AT 101-key kbd
+
+.h2 KEYMAP
+# Key remapping definitions!
+#
+# You may redefine the keymapping of any function in Lynx by
+# using the KEYMAP option.  The basic form of KEYMAP is:
+#  KEYMAP:<KEYSTROKE>:<LYNX FUNCTION>
+# (See below for an extended format.)
+#
+# You must map upper and lowercase keys separately.
+#
+# A representative list of functions mapped to their default keys is
+# provided below.  All of the mappings are commented out by default
+# since they just repeat the default mappings, except for TOGGLE_HELP
+# (see below).  See LYKeymap.c for the complete key mapping.  Use the
+# 'K'eymap command when running Lynx for a list of the _current_ keymappings.
+#
+# You can disable any of the default key-mappings by mapping the key to
+# "UNMAPPED".
+#
+# (However, in contrast to the output of 'K' command,
+# 'H'elp (lynx_help/*.html and lynx_help/keystrokes/*.html files) shows
+# the default mapping unless you change that files manually,
+# so you are responsible for possible deviations
+# when you are changing any KEYMAP below).
+#
+# Lynx accepts special keys either by name, or by lynx-specific codes.  These
+# names and codes are listed below, with a brief description:
+.nf
+#         UPARROW: 0x100 (Up Arrow)
+#         DNARROW: 0x101 (Down Arrow)
+#         RTARROW: 0x102 (Right Arrow)
+#         LTARROW: 0x103 (Left Arrow)
+#          PGDOWN: 0x104 (Page Down)
+#            PGUP: 0x105 (Page Up)
+#            HOME: 0x106 (Keypad Home)
+#             END: 0x107 (Keypad End)
+#              F1: 0x108 (VT220 Function-key 1, also Help Key)
+#          DO_KEY: 0x109 (VT220 Function key 16, also "Do" Key)
+#        FIND_KEY: 0x10A (VT220 key with label "Home" may be treated as Find)
+#      SELECT_KEY: 0x10B (VT220 key with label "End" may be treated as Select)
+#      INSERT_KEY: 0x10C (VT220 Insert Key)
+#      REMOVE_KEY: 0x10D (VT220 Remove (DEL) Key)
+#      DO_NOTHING: 0x10E (reserved for internal use, DO_NOTHING)
+#     BACKTAB_KEY: 0x10F (Back Tab, e.g., using Shift)
+#              F2: 0x110 (VT220 Function-key 2)
+#              F3: 0x111 (VT220 Function-key 3)
+#              F4: 0x112 (VT220 Function-key 4)
+#              F5: 0x113 (VT220 Function-key 5)
+#              F6: 0x114 (VT220 Function-key 6)
+#              F7: 0x115 (VT220 Function-key 7)
+#              F8: 0x116 (VT220 Function-key 8)
+#              F9: 0x117 (VT220 Function-key 9)
+#             F10: 0x118 (VT220 Function-key 10)
+#             F11: 0x119 (VT220 Function-key 11)
+#             F12: 0x11A (VT220 Function-key 12)
+#           MOUSE: 0x11D (reserved for internal use with -use_mouse)
+.fi
+# Other codes not listed above may be available for additional keys,
+# depending on operating system and libraries used to compile Lynx.
+# On Unix-like systems, if compiled with slang or ncurses, an additional
+# level of key mapping is supported via an external ".lynx-keymaps" file.
+# This file, if found in the home directory at startup, will always be
+# used under those conditions; see lynx-keymaps distributed in the samples
+# subdirectory for further explanation.  Note that mapping via
+# .lynx-keymaps, if applicable, is a step that logically comes before the
+# mappings done here: KEYMAP maps the result of that step (which still
+# represents a key) to a function (which represents an action that Lynx
+# should perform).
+.nf
+#
+#KEYMAP:0x5C:SOURCE             # Toggle source viewing mode (show HTML source)
+#KEYMAP:^R:RELOAD               # Reload the current document and redisplay
+#KEYMAP:^U:NEXT_DOC             # Undo PREV_DOC)
+#KEYMAP:q:QUIT                  # Ask the user to quit
+#KEYMAP:Q:ABORT                 # Quit without verification
+#KEYMAP:0x20:NEXT_PAGE          # Move down to next page
+#KEYMAP:-:PREV_PAGE             # Move up to previous page
+#KEYMAP:^P:UP_TWO               # Move display up two lines
+#KEYMAP:INSERT_KEY:UP_TWO       # Function key Insert - Move display up two lines
+#KEYMAP:^N:DOWN_TWO             # Move display down two lines
+#KEYMAP:REMOVE_KEY:DOWN_TWO     # Function key Remove - Move display down two lines
+#KEYMAP:(:UP_HALF               # Move display up half a page
+#KEYMAP:):DOWN_HALF             # Move display down half a page
+#KEYMAP:^W:REFRESH              # Refresh the screen
+#KEYMAP:^A:HOME                 # Go to top of current document
+#KEYMAP:HOME:HOME               # Keypad Home - Go to top of current document
+#KEYMAP:FIND_KEY:HOME           # Function key Find - Go to top of current document
+#KEYMAP:^E:END                  # Go to bottom of current document
+#KEYMAP:END:END                 # Keypad End - Go to bottom of current document
+#KEYMAP:SELECT_KEY:END          # Function key Select - Go to bottom of current document
+#KEYMAP:UPARROW:PREV_LINK       # Move to the previous link or page
+#KEYMAP:DNARROW:NEXT_LINK       # Move to the next link or page
+#KEYMAP:BACKTAB_KEY:FASTBACKW_LINK      # Back Tab - Move to previous link or text area
+#KEYMAP:^I:FASTFORW_LINK        # Tab key - Move always to next link or text area
+#KEYMAP:^:FIRST_LINK            # Move to the first link on line
+#KEYMAP:$:LAST_LINK             # Move to the last link on line
+#KEYMAP:<:UP_LINK               # Move to the link above
+#KEYMAP:>:DOWN_LINK             # Move to the link below
+#KEYMAP:0x7F:HISTORY            # Show the history list
+#KEYMAP:0x08:HISTORY            # Show the history list
+#KEYMAP:LTARROW:PREV_DOC        # Return to the previous document in history stack
+#KEYMAP:RTARROW:ACTIVATE        # Select the current link
+#KEYMAP:DO_KEY:ACTIVATE         # Function key Do - Select the current link
+#KEYMAP:g:GOTO                  # Goto a random URL
+#KEYMAP:G:ECGOTO                # Edit the current document's URL and go to it
+#KEYMAP:H:HELP                  # Show default help screen
+#KEYMAP:F1:DWIMHELP             # Function key Help - Show a help screen
+#KEYMAP:i:INDEX                 # Show default index
+#*** Edit FORM_LINK_* messages in LYMessages_en.h if you change NOCACHE ***
+#KEYMAP:x:NOCACHE               # Force submission of form or link with no-cache
+#*** Do not change INTERRUPT from 'z' & 'Z' ***
+#KEYMAP:z:INTERRUPT             # Interrupt network transmission
+#KEYMAP:m:MAIN_MENU             # Return to the main menu
+#KEYMAP:o:OPTIONS               # Show the options menu
+#KEYMAP:i:INDEX_SEARCH          # Search a server based index
+#KEYMAP:/:WHEREIS               # Find a string within the current document
+#KEYMAP:n:NEXT                  # Find next occurrence of string within document
+#KEYMAP:c:COMMENT               # Comment to the author of the current document
+#KEYMAP:C:CHDIR                 # Change current directory
+#KEYMAP:e:EDIT                  # Edit current document or form's textarea (call: ^Ve)
+#KEYMAP:E:ELGOTO                # Edit the current link's URL or ACTION and go to it
+#KEYMAP:=:INFO                  # Show info about current document
+#KEYMAP:p:PRINT                 # Show print options
+#KEYMAP:a:ADD_BOOKMARK          # Add current document to bookmark list
+#KEYMAP:v:VIEW_BOOKMARK         # View the bookmark list
+#KEYMAP:V:VLINKS                # List links visited during the current Lynx session
+#KEYMAP:!:SHELL                 # Spawn default shell
+#KEYMAP:d:DOWNLOAD              # Download current link
+#KEYMAP:j:JUMP                  # Jump to a predefined target
+#KEYMAP:k:KEYMAP                # Display the current key map
+#KEYMAP:l:LIST                  # List the references (links) in the current document
+#KEYMAP:#:TOOLBAR               # Go to the Toolbar or Banner in the current document
+#KEYMAP:^T:TRACE_TOGGLE         # Toggle detailed tracing for debugging
+#KEYMAP:;:TRACE_LOG             # View trace log if available for the current session
+#KEYMAP:*:IMAGE_TOGGLE          # Toggle inclusion of links for all images
+#KEYMAP:[:INLINE_TOGGLE         # Toggle pseudo-ALTs for inlines with no ALT string
+#KEYMAP:]:HEAD                  # Send a HEAD request for current document or link
+#*** Must be compiled with USE_EXTERNALS to enable EXTERN_LINK, EXTERN_PAGE ***
+#KEYMAP:,:EXTERN_PAGE           # Run external program with current page
+#KEYMAP:.:EXTERN_LINK           # Run external program with current link
+#*** Escaping from text input fields with ^V is independent from this: ***
+#KEYMAP:^V:SWITCH_DTD           # Toggle between SortaSGML and TagSoup HTML parsing
+#KEYMAP:0x00:DO_NOTHING         # Does nothing (ignore this key)
+#KEYMAP:DO_NOTHING:DO_NOTHING   # Does nothing (ignore this key)
+#KEYMAP:{:SHIFT_LEFT            # shift the screen left
+#KEYMAP:}:SHIFT_RIGHT           # shift the screen right
+#KEYMAP:|:LINEWRAP_TOGGLE       # toggle linewrap on/off, for shift-commands
+#KEYMAP:~:NESTED_TABLES         # toggle nested-tables parsing on/off
+.fi
+# In addition to the bindings available by default, the following functions
+# are not directly mapped to any keys by default, although some of them may
+# be mapped in specific line-editor bindings (effective while in text input
+# fields):
+.nf
+#
+#KEYMAP:???:RIGHT_LINK          # Move to the link to the right
+#KEYMAP:???:LEFT_LINK           # Move to the link to the left
+#KEYMAP:???:LPOS_PREV_LINK      # Like PREV_LINK, last column pos if form input
+#KEYMAP:???:LPOS_NEXT_LINK      # Like NEXT_LINK, last column pos if form input
+#*** Only useful in form text fields , need PASS or prefixing with ^V: ***
+#KEYMAP:???:DWIMHELP            # Display help page that may depend on context
+#KEYMAP:???:DWIMEDIT            # Use external editor for context-dependent purpose
+#*** Only useful in a form textarea, need PASS or prefixing with ^V: ***
+#KEYMAP:???:EDITTEXTAREA        # use external editor to edit a form textarea
+#KEYMAP:???:GROWTEXTAREA        # Add some blank lines to bottom of textarea
+#KEYMAP:???:INSERTFILE          # Insert file into a textarea (just above cursor)
+#*** Only useful with dired support and OK_INSTALL: ***
+#KEYMAP:???:INSTALL             # install (i.e. copy) local files to new location
+.fi
+#
+# If TOGGLE_HELP is mapped, in novice mode the second help menu line
+# can be toggled among NOVICE_LINE_TWO_A, _B, and _C, as defined in
+# LYMessages_en.h  Otherwise, it will be NOVICE_LINE_TWO.
+#
+#KEYMAP:O:TOGGLE_HELP           # Show other commands in the novice help menu
+#
+# KEYMAP lines can have one or two additional fields.  The extended format is
+#  KEYMAP:<KEYSTROKE>:[<MAIN LYNX FUNCTION>]:<OTHER BINDING>[:<SELECT>]
+#
+# If the additional field OTHER BINDING specifies DIRED, then the function is
+# mapped in the override table used only in DIRED mode.  This is only valid
+# if lynx was compiled with dired support and OK_OVERRIDE defined.  A
+# MAIN LYNX FUNCTION must be given (it should of course be one that makes
+# sense in Dired mode), and SELECT is meaningless.  Default built-in override
+# mappings are
+#
+#KEYMAP:^U:NEXT_DOC:DIRED       # Undo going back to the previous document
+#KEYMAP:.:TAG_LINK:DIRED        # Tag a file or directory for later action
+#KEYMAP:c:CREATE:DIRED          # Create a new file or directory
+#KEYMAP:C:CHDIR:DIRED           # change current directory
+#KEYMAP:f:DIRED_MENU:DIRED      # Display a menu of file operations
+#KEYMAP:m:MODIFY:DIRED          # Modify name or location of a file or directory
+#KEYMAP:r:REMOVE:DIRED          # Remove files or directories
+#KEYMAP:t:TAG_LINK:DIRED        # Tag a file or directory for later action
+#KEYMAP:u:UPLOAD:DIRED          # Show menu of "Upload Options"
+#
+# If the OTHER BINDING field does not specify DIRED, then it is taken as a
+# line-editor action.  It is possible to keep the MAIN LYNX FUNCTION field
+# empty in that case, for changing only the line-editing behavior.
+# If alternative line edit styles are compiled in, and modifying a key's
+# line-editor binding on a per style basis is possible, then SELECT can be
+# used to specify which styles are affected.  By default, or if SELECT is
+# 0, all line edit styles are affected.  If SELECT is a positive integer
+# number, only the binding for the numbered style is changed (numbering
+# is in the order in which styles are shown in the Options Menu, starting
+# with 1 for the Default style).  If SELECT is negative (-n), all styles
+# except n are affected.
+.nf
+#
+#  NOP          # Do Nothing
+#  ABORT        # Input cancelled
+#
+#  BOL          # Go to begin of line
+#  EOL          # Go to end   of line
+#  FORW         # Cursor forwards
+#  FORW_RL      # Cursor forwards or right link
+#  BACK         # Cursor backwards
+#  FORWW        # Word forward
+#  BACKW        # Word back
+#  BACK_LL      # Cursor backwards or left link
+#
+#  DELN         # Delete next/curr char
+#  DELP         # Delete prev      char
+#  DELNW        # Delete next word
+#  DELPW        # Delete prev word
+#  DELBL        # Delete back to BOL
+#  DELEL        # Delete through EOL
+#  ERASE        # Erase the line
+#  LOWER        # Lower case the line
+#  UPPER        # Upper case the line
+#
+#  LKCMD        # In fields: Invoke key command prompt (default for ^V)
+#  PASS         # In fields: handle as non-lineedit key; in prompts: ignore
+#
+.fi
+# Modify following key (prefixing only works within line-editing, edit actions
+# of some resulting prefixed keys are built-in, see Line Editor help pages)
+#  SETM1        # Set modifier 1 flag (default for ^X - key prefix)
+#  SETM2        # Set modifier 2 flag (another key prefix - same effect)
+#
+# May not always be compiled in:
+.nf
+#
+#  TPOS         # Transpose characters
+#  SETMARK      # emacs-like set-mark-command
+#  XPMARK       # emacs-like exchange-point-and-mark
+#  KILLREG      # emacs-like kill-region
+#  YANK         # emacs-like yank
+#  SWMAP        # Switch input keymap
+#  PASTE        # ClipBoard to Lynx - Windows Extension
+#
+.fi
+# May work differently from expected if not bound to their expected keys:
+.nf
+#
+#  CHAR         # Insert printable char (default for all ASCII printable)
+#  ENTER        # Input complete, return char/lynxkeycode (for RETURN/ENTER)
+#  TAB          # Input complete, return TAB (for ASCII TAB char ^I)
+#
+.fi
+# Internal use, probably not useful for binding, listed for completeness:
+.nf
+#
+#  UNMOD        # Fall back to no-modifier command
+#  AIX          # Hex 97
+#  C1CHAR       # Insert C1 char if printable
+#
+.fi
+# If OTHER BINDING specifies PASS, then if the key is pressed in a text input
+# field it is passed by the built-in line-editor to normal KEYMAP handling,
+# i.e. this flag acts like an implied ^V escape (always overrides line-editor
+# behavior of the key).  For example,
+#KEYMAP:INSERT_KEY:UP_TWO:PASS # Function key Insert - Move display up two lines
+#
+# Other examples (repeating built-in bindings)
+#KEYMAP:^V::LKCMD       # set (only) line-edit action for ^V
+#KEYMAP:^V:SWITCH_DTD:LKCMD # set main lynxaction and line-edit action for ^V
+#KEYMAP:^U::ERASE:1     # set line-edit binding for ^U, for default style
+#KEYMAP:^[::SETM2:3     # use escape key as modifier - works only sometimes
+
+.h1 External Programs
+# These settings control the ability of Lynx to invoke various programs for
+# the user.
+
+.h2 CSWING_PATH
+# VMS ONLY:
+#==========
+# On VMS, CSwing (an XTree emulation for VTxxx terminals) is intended for
+# use as the Directory/File Manager (sources, objects, or executables were
+# available from ftp://narnia.memst.edu/).  CSWING_PATH should be defined
+# here or in userdefs.h to your foreign command for CSwing, with any
+# regulatory switches you want included.  If not defined, or defined as
+# a zero-length string ("") or "none" (case-insensitive), the support
+# will be disabled.  It will also be disabled if the -nobrowse or
+# -selective switches are used, or if the file_url restriction is set.
+#
+# When enabled, the DIRED_MENU command (normally 'f' or 'F') will invoke
+# CSwing, normally with the current default directory as an argument to
+# position the user on that node of the directory tree.  However, if the
+# current document is a local directory listing, or a local file and not
+# one of the temporary menu or list files, the associated directory will
+# be passed as an argument, to position the user on that node of the tree.
+#
+#CSWING_PATH:swing
+
+.h1 Internal Behavior
+
+.h2 AUTO_UNCACHE_DIRLISTS
+# AUTO_UNCACHE_DIRLISTS determines when local file directory listings are
+# automatically regenerated (by re-reading the actual directory from disk).
+# Set the value to 0 to avoid automatic regeneration in most cases.  This is
+# useful for browsing large directories that take some time to read and format.
+# An update can still always be forced with the RELOAD key, and specific DIRED
+# actions may cause a refresh anyway.  Set the value to 1 to force regeneration
+# after commands that usually change the directory or some files and would make
+# the displayed info stale, like EDIT and REMOVE.  Set it to 2 (the default) or
+# greater to force regeneration even after leaving the displayed directory
+# listing by some action that usually causes no change, like GOTO or entering a
+# file with the ACTIVATE key.  This option is only honored in DIRED mode (i.e.
+# when lynx is compiled with DIRED_SUPPORT and it is not disabled with a
+# -restriction).  Local directories displayed without DIRED normally act as if
+# AUTO_UNCACHE_DIRLISTS:0 was in effect.
+#
+#AUTO_UNCACHE_DIRLISTS:2
+
+.h1 Appearance
+
+.h2 LIST_FORMAT
+# LIST_FORMAT defines the display for local files when Lynx has been
+# compiled with LONG_LIST defined in the Makefile.  The default is set
+# in userdefs.h, normally to "ls -l" format, and can be changed here
+# by uncommenting the indicated lines, or adding a definition with a
+# modified parameter list.
+#
+# This feature is not available for VMS.
+#
+# The percent items in the list are interpreted as follows:
+.nf
+#
+#       %p      Unix-style permission bits
+#       %l      link count
+#       %o      owner of file
+#       %g      group of file
+#       %d      date of last modification
+#       %a      anchor pointing to file or directory
+#       %A      as above but don't show symbolic links
+#       %t      type of file (description derived from MIME type)
+#       %T      MIME type as known by Lynx (from mime.types or default)
+#       %k      size of file in Kilobytes
+#       %K      as above but omit size for directories
+#       %s      size of file in bytes
+#
+.fi
+# Anything between the percent and the letter is passed on to sprintf.
+# A double percent yields a literal percent on output.  Other characters
+# are passed through literally.
+#
+# If you want only the filename:
+#
+.ex
+#LIST_FORMAT:    %a
+#
+# If you want a brief output:
+#
+.ex
+#LIST_FORMAT:   %4K %-12.12d %a
+#
+# If you want the Unix "ls -l" format:
+#
+.ex
+#LIST_FORMAT:    %p %4l %-8.8o %-8.8g %7s %-12.12d %a
+
+.h1 External Programs
+
+.h2 DIRED_MENU
+# Unix ONLY:
+#===========
+# DIRED_MENU items are used to compose the F)ull menu list in DIRED mode
+# The behavior of the default configuration given here is much the same
+# as it was when this menu was hard-coded but these items can now be adjusted
+# to suit local needs.  In particular, many of the LYNXDIRED actions can be
+# replaced with lynxexec, lynxprog and lynxcgi script references.
+#
+# NOTE that defining even one DIRED_MENU line overrides all the built-in
+# definitions, so a complete set must then be defined here.
+#
+# Each line consists of the following fields:
+.nf
+#
+#       DIRED_MENU:type:suffix:link text:extra text:action
+#
+#       type: TAG:   list only when one or more files are tagged
+#             FILE:  list only when the current selection is a regular file
+#             DIR:   list only when the current selection is a directory
+#             LINK:  list only when the current selection is a symbolic link
+#
+#       suffix:  list only if the current selection ends in this pattern
+#
+#       link text:  the displayed text of the link
+#
+#       extra text:  the text displayed following the link
+#
+#       action:  the URL to be followed upon selection
+#
+#       link text and action are scanned for % sequences that are expanded
+#       at display time as follows:
+#
+#               %p  path of current selection
+#               %f  filename (last component) of current selection
+#               %t  tagged list (full paths)
+#               %l  list of tagged file names
+#               %d  the current directory
+#
+.fi
+#DIRED_MENU:::New File:(in current directory):LYNXDIRED://NEW_FILE%d
+#DIRED_MENU:::New Directory:(in current directory):LYNXDIRED://NEW_FOLDER%d
+#
+# Following depends on OK_INSTALL
+#DIRED_MENU:FILE::Install:selected file to new location:LYNXDIRED://INSTALL_SRC%p
+#DIRED_MENU:DIR::Install:selected directory to new location:LYNXDIRED://INSTALL_SRC%p
+#
+#DIRED_MENU:FILE::Modify File Name:(of current selection):LYNXDIRED://MODIFY_NAME%p
+#DIRED_MENU:DIR::Modify Directory Name:(of current selection):LYNXDIRED://MODIFY_NAME%p
+#DIRED_MENU:LINK::Modify Name:(of selected symbolic link):LYNXDIRED://MODIFY_NAME%p
+#
+# Following depends on OK_PERMIT
+#DIRED_MENU:FILE::Modify File Permissions:(of current selection):LYNXDIRED://PERMIT_SRC%p
+#DIRED_MENU:DIR::Modify Directory Permissions:(of current selection):LYNXDIRED://PERMIT_SRC%p
+#
+#DIRED_MENU:FILE::Change Location:(of selected file):LYNXDIRED://MODIFY_LOCATION%p
+#DIRED_MENU:DIR::Change Location:(of selected directory):LYNXDIRED://MODIFY_LOCATION%p
+#DIRED_MENU:LINK::Change Location:(of selected symbolic link):LYNXDIRED://MODIFY_LOCATION%p
+#DIRED_MENU:FILE::Remove File:(current selection):LYNXDIRED://REMOVE_SINGLE%p
+#DIRED_MENU:DIR::Remove Directory:(current selection):LYNXDIRED://REMOVE_SINGLE%p
+#DIRED_MENU:LINK::Remove Symbolic Link:(current selection):LYNXDIRED://REMOVE_SINGLE%p
+#
+# Following depends on OK_UUDECODE and !ARCHIVE_ONLY
+#DIRED_MENU:FILE::UUDecode:(current selection):LYNXDIRED://UUDECODE%p
+#
+# Following depends on OK_TAR and !ARCHIVE_ONLY
+#DIRED_MENU:FILE:.tar.Z:Expand:(current selection):LYNXDIRED://UNTAR_Z%p
+#
+# Following depend on OK_TAR and OK_GZIP and !ARCHIVE_ONLY
+#DIRED_MENU:FILE:.tar.gz:Expand:(current selection):LYNXDIRED://UNTAR_GZ%p
+#DIRED_MENU:FILE:.tgz:Expand:(current selection):LYNXDIRED://UNTAR_GZ%p
+#
+# Following depends on !ARCHIVE_ONLY
+#DIRED_MENU:FILE:.Z:Uncompress:(current selection):LYNXDIRED://DECOMPRESS%p
+#
+# Following depends on OK_GZIP and !ARCHIVE_ONLY
+#DIRED_MENU:FILE:.gz:Uncompress:(current selection):LYNXDIRED://UNGZIP%p
+#
+# Following depends on OK_ZIP and !ARCHIVE_ONLY
+#DIRED_MENU:FILE:.zip:Uncompress:(current selection):LYNXDIRED://UNZIP%p
+#
+# Following depends on OK_TAR and !ARCHIVE_ONLY
+#DIRED_MENU:FILE:.tar:UnTar:(current selection):LYNXDIRED://UNTAR%p
+#
+# Following depends on OK_TAR
+#DIRED_MENU:DIR::Tar:(current selection):LYNXDIRED://TAR%p
+#
+# Following depends on OK_TAR and OK_GZIP
+#DIRED_MENU:DIR::Tar and compress:(using GNU gzip):LYNXDIRED://TAR_GZ%p
+#
+# Following depends on OK_ZIP
+#DIRED_MENU:DIR::Package and compress:(using zip):LYNXDIRED://ZIP%p
+#
+#DIRED_MENU:FILE::Compress:(using Unix compress):LYNXDIRED://COMPRESS%p
+#
+# Following depends on OK_GZIP
+#DIRED_MENU:FILE::Compress:(using gzip):LYNXDIRED://GZIP%p
+#
+# Following depends on OK_ZIP
+#DIRED_MENU:FILE::Compress:(using zip):LYNXDIRED://ZIP%p
+#
+#DIRED_MENU:TAG::Move all tagged items to another location.::LYNXDIRED://MOVE_TAGGED%d
+#
+# Following depends on OK_INSTALL
+#DIRED_MENU:TAG::Install tagged files into another directory.::LYNXDIRED://INSTALL_SRC%00
+#
+#DIRED_MENU:TAG::Remove all tagged files and directories.::LYNXDIRED://REMOVE_TAGGED
+#DIRED_MENU:TAG::Untag all tagged items.::LYNXDIRED://CLEAR_TAGGED
+
+.h1 Internal Behavior
+
+.h2 NONRESTARTING_SIGWINCH
+# Some systems only:
+#===================
+# Lynx tries to detect window size changes with a signal handler for
+# SIGWINCH if supported.  If NONRESTARTING_SIGWINCH is set to TRUE,
+# and the sigaction interface is available on the system, the handler
+# is installed as 'non-restarting'.  On some systems (depending on the
+# library used for handling keyboard input, e.g. ncurses), this allows
+# more immediate notification of window size change events.  If the value
+# is set to FALSE, the signal() interface is used; this normally makes
+# the handler 'restarting', with the effect that lynx can react to size
+# changes only after some key is pressed.  The value can also be set to
+# XWINDOWS; this is equivalent to TRUE when the user has the environment
+# variable DISPLAY defined *at program start*, and equivalent to FALSE
+# otherwise.  The non-restarting behavior can also be changed to TRUE
+# or FALSE with the -nonrestarting_sigwinch switch, which overrides the
+# value in this file.
+#
+# Note that Lynx never re-parses document text purely as a result of a
+# window size change, so text lines may appear truncated after narrowing
+# the window, until the document is reloaded with ^R or a similar key
+# or until a different text is loaded.
+#
+# The default is FALSE since there is a possibility that non-restarting
+# interrupts may be mis-interpreted as fatal input errors in some
+# configurations (leading to an abrupt program exit), and since this
+# option is useful mostly only for users running Lynx under xterm or a
+# similar X terminal emulator.  On systems where the preconditions don't
+# apply this option is ignored.
+#
+#NONRESTARTING_SIGWINCH:FALSE
+
+.h2 NO_FORCED_CORE_DUMP
+# Unix ONLY:
+#===========
+# If NO_FORCED_CORE_DUMP is set to TRUE, Lynx will not force
+# core dumps via abort() calls on fatal errors or assert()
+# calls to check potentially fatal errors.  The compilation
+# default normally is FALSE, and can be changed here.  The
+# compilation or configuration default can be toggled via
+# the -core command line switch.
+# Note that this setting cannot be used to prevent core dumps
+# with certainty.  If this is important, means provided by the
+# operating system or kernel should be used.
+#
+#NO_FORCED_CORE_DUMP:FALSE
+
+.h1 Appearance
+
+.h2 COLOR
+# COLORS are only available if compiled with SVr4 curses or slang.  This is
+# the old color configuration.  The COLOR_STYLE configuration is compiled-in
+# and can simulate this if the ".lss" filename is empty.
+#
+# The line must be of the form:
+#
+# COLOR:Integer:Foreground:Background
+.nf
+#
+# The Integer value is interpreted as follows:
+#   0 - normal                      - normal text
+#   1 - bold                        - hyperlinks, see also BOLD_* options above
+#   2 - reverse                     - statusline
+#   3 - bold + reverse              (not used)
+#   4 - underline                   - text emphasis (EM, I, B tags etc.)
+#   5 - bold + underline            - hyperlinks within text emphasis
+#   6 - reverse + underline         - currently selected hyperlink
+#   7 - reverse + underline + bold  - WHEREIS search hits
+#
+# Each Foreground and Background value must be one of:
+#   black         red            green         brown
+#   blue          magenta        cyan          lightgray
+#   gray          brightred      brightgreen   yellow
+#   brightblue    brightmagenta  brightcyan    white
+.fi
+# or (if you have configured using -enable-default-colors with ncurses or
+# slang), "default" may be used for foreground and background.
+#
+# Note that in most cases a white background is really "lightgray", since
+# terminals generally do not implement bright backgrounds.
+#
+# Uncomment and change any of the compilation defaults.
+#
+#COLOR:0:black:white
+#COLOR:1:blue:white
+#COLOR:2:yellow:blue
+#COLOR:3:green:white
+#COLOR:4:magenta:white
+#COLOR:5:blue:white
+#COLOR:6:red:white
+COLOR:6:brightred:black
+#COLOR:7:magenta:cyan
+
+.h2 COLOR_STYLE
+# Also known as "lss" (lynx style-sheet), the color-style file assigns color
+# combination to tags and combinations of tags.  Normally a non-empty value
+# is compiled into lynx, and the user can override that using the -lss
+# command-line option.  The configure script allows one to compile in an
+# empty string.  If lynx finds no value for this setting, it simulates the
+# non-color-style assignments using the COLOR settings.
+#
+# If neither the command-line "-lss" or this COLOR_STYLE setting are given,
+# lynx tries the environment variables "LYNX_LSS" and "lynx_lss".  If neither
+# is set, lynx uses the first compiled-in value (which as noted, may be empty).
+#
+# At startup, lynx remembers the name of the color-style file which was used,
+# and together with each file specified, provides those as choices in the
+# O)ptions menu.
+#
+#COLOR_STYLE: lynx.lss
+#COLOR_STYLE: blue-background.lss
+#COLOR_STYLE: bright-blue.lss
+#COLOR_STYLE: midnight.lss
+#COLOR_STYLE: mild-colors.lss
+#COLOR_STYLE: opaque.lss
+
+.h2 NESTED_TABLES
+# This is an experimental feature for improving table layout.
+# It is enabled by default when the COLOR_STYLE configuration is used,
+# and false otherwise.
+#
+#NESTED_TABLES: true
+
+.h2 NO_TABLE_CENTER
+# Normally table cells are centered on the table grid.
+# Set this option to true to disable centering.
+# The -center command-line option toggles this setting between true/false.
+#NO_TABLE_CENTER: false
+
+.h2 ASSUMED_COLOR
+# If built with a library that recognizes default colors (usually ncurses or
+# slang), and if the corresponding option is compiled into lynx, lynx
+# initializes it to assume the corresponding foreground and background colors.
+# Default colors are those that the terminal (emulator) itself is initialized
+# to.  For instance, you might have an xterm running with black text on a white
+# background, and want lynx to display colored text on the white background,
+# but leave the possibility of using the same configuration to draw colored
+# text on a different xterm, this time using its background set to black.
+#
+# If built with conventional SVr3/SVr4 curses, tells lynx to use color pair 0
+# when the given colors match this setting.  That gives a similar effect,
+# though not as flexible.  You will get the best results by setting the
+# terminal's default colors to match the prevailing text and background colors
+# that you have setup with lynx, and then alter the ASSUMED_COLOR setting to
+# match that.  If you do not alter the ASSUMED_COLOR setting, curses assumes
+# color pair 0's background is black, which implies that its foreground (text)
+# is white.
+#
+# The first value given is the foreground, the second is the background.
+#ASSUMED_COLOR:default:default
+
+.h2 DEFAULT_COLORS
+# If built with a library that recognizes default colors (usually ncurses or
+# slang), and if the corresponding option is compiled into lynx, lynx
+# initializes it to assume the corresponding foreground and background colors.
+# Default colors are those that the terminal (emulator) itself is initialized
+# to.
+#
+# Use this feature to disable the default-colors feature at runtime.
+# This is useful for constructing scripts which use the non-color-style
+# scheme, e.g., the oldlynx script.
+#
+# This should precede ASSUMED_COLOR settings.
+#DEFAULT_COLORS:true
+
+.h1 External Programs
+
+.h2 EXTERNAL
+# External application support.  This feature allows Lynx to pass a given
+# URL to an external program.  It was written for three reasons.
+#
+# 1) To overcome the deficiency of Lynx_386 not supporting ftp and news.
+#    External programs can be used instead by passing the URL.
+#
+# 2) To allow for background    transfers in multitasking systems.
+#    I use wget for http and ftp transfers via the external command.
+#
+# 3) To allow for new URLs to be used through Lynx.
+#         URLs can be made up such as mymail: to spawn desired applications
+#         via the external command.
+#
+# Restrictions can be imposed using -restrictions=externals at the Lynx command
+# line.  This will disallow all EXTERNAL lines in lynx.cfg that have FALSE in
+# the 3rd field (not counting the name of the setting).  TRUE lines will still
+# function.
+#
+# The lynx.cfg line is as follows:
+#
+# EXTERNAL:<url>:<command> %s:<norestriction>:<allow_for_activate>[:environment]
+#
+# <url> Any given URL.  This can be normal ones like ftp or http or it
+# can be one made up like mymail.
+#
+# <command> The command to run with %s being the URL that will be passed.
+# In Linux I use "wget -q %s &" (no quotes) to spawn a copy of wget for
+# downloading http and ftp files in the background.  In Win95 I use
+# "start ncftp %s" to spawn ncftp in a new window.
+#
+# <norestriction> This complements the -restrictions=externals feature to allow
+# for certain externals to be enabled while restricting others.  TRUE means
+# a command will still function while Lynx is restricted.  WB
+#
+# <allow_for_activate> Setting this to TRUE allows the use of this command not
+# only when EXTERN key is pressed, but also when ACTIVATE command is invoked
+# (i.e., activating the link with the given prefix will be equivalent to
+# pressing EXTERN key on it).  If this component of the line is absent, then
+# FALSE is assumed.
+#
+# [:environment] Optional, if XWINDOWS then command is allowed only if
+# $DISPLAY environment variable is set, else if NON_XWINDOWS then command
+# is allowed only if $DISPLAY environment variable is not set, if absent or
+# anything else command is always allowed.
+#
+# For invoking the command use the EXTERN_LINK or EXTERN_PAGE key.  By default
+# EXTERN_LINK is mapped to '.', and EXTERN_PAGE to ',' (if the feature is
+# enabled), see the KEYMAP section above.
+#
+#EXTERNAL:ftp:wget %s &:TRUE
+
+.h2 EXTERNAL_MENU
+# Like EXTERNAL, but allows customizing the menu name.
+# Here is the syntax:
+.ex 1
+# EXTERNAL_MENU:<url>:<menu>:<command> %s:<norestriction>:<allow_for_activate>[:environment]
+
+.h1 Internal Behavior
+
+.h2 RULE
+.h2 RULESFILE
+# CERN-style rules, EXPERIMENTAL  -  URL-specific rules
+#
+# A CERN-style rules file can be given with RULESFILE.  Use the system's
+# native format for filenames, on Unix '~' is also recognized.  If a filename
+# is given, the file must exist.
+#
+# Single CERN-style rules can be specified with RULES.
+#
+# Both options can be repeated, rules accumulate in the order
+# given, they will be applied in first-to-last order.  See cernrules.txt
+# in the samples subdirectory for further explanation.
+#
+# Examples:
+.ex 5
+#       RULESFILE:/etc/lynx/cernrules
+#       RULE:Fail       gopher:*                     # reject by scheme
+#       RULE:Pass       finger://*@localhost/        # allow this,
+#       RULE:Fail       finger:*                     # but not others
+#       RULE:Redirect   http://old.server/*     http://new.server/*
+
+.h1 Appearance
+
+.h2 PRETTYSRC
+# Enable pretty source view
+#PRETTYSRC:FALSE
+
+.h2 PRETTYSRC_SPEC
+# Pretty source view settings. These settings are in effect when -prettysrc
+# is specified.
+# The following lexical elements (lexemes) are recognized:
+# comment, tag, attribute, attribute value, generalized angle brackets (
+# '<' '>' '</' ), entity, hyperlink destination, entire file, bad sequence,
+# bad tag, bad attribute, sgml special.
+#  The following group of option tells which styles will surround each
+# lexeme. The syntax of option in this group is:
+#PRETTYSRC_SPEC:<LEXEMENAME>:<TAGSPEC>:<TAGSPEC>
+# The first <TAGSPEC> specifies what tags will precede lexemes of that class
+# in the internal html markup. The second - what will be placed (internally)
+# after it.
+# TAGSPEC has the following syntax:
+# <TAGSPEC>:= [ (<TAGOPEN> | <TAGCLOSE>) <SPACE>+ ]*
+# <TAGOPEN>:= tagname[.classname]
+# <TAGCLOSE>:= !tagname
+#
+# The following table gives correspondence between lexeme and lexeme name
+.nf
+# Lexeme                   LEXEMENAME  FURTHER EXPLANATION
+# =========================================================
+# comment                  COMM
+# tag                      TAG         recognized tag name only
+# attribute                ATTRIB
+# attribute value          ATTRVAL
+# generalized brackets     ABRACKET    <  >  </
+# entity                   ENTITY
+# hyperlink destination    HREF
+# entire file              ENTIRE
+# bad sequence             BADSEQ      bad entity or invalid construct at text
+#                                      level.
+# bad tag                  BADTAG      Unrecognized construct in generalized
+#                                      brackets.
+# bad attribute            BADATTR     The name of the attribute unknown to lynx
+#                                      of the tag known to lynx. (i.e.,
+#                                      attributes of unknown tags will have
+#                                      markup of  ATTRIB)
+# sgml special             SGMLSPECIAL doctype, sgmlelt, sgmlele,
+#                                      sgmlattlist, marked section, identifier
+.fi
+#
+# Notes:
+#
+# 1) The markup for HTML_ENTIRE will be emitted only once - it will surround
+#    entire file source.
+#
+# 2) The tagnames specified by TAGSPEC should be valid html tag names.
+#
+# 3) If the tag/class combination given by TAGOPEN is not assigned a color
+#    style in lss file (for lynx compiled with lss support), that tag/class
+#    combination will be emitted anyway during internal html markup. Such
+#    combinations will be also reported to the trace log.
+#
+# 4) Lexeme 'tag' means tag name only
+#
+# 5) Angle brackets of html specials won't be surrounded by markup for ABRACKET
+#
+.ex
+# PRETTYSRC_SPEC:COMM:B I:!I !B
+#           HTML comments will be surrounded by <b><i> and </i></b> in the
+#           internal html markup
+.ex
+# PRETTYSRC_SPEC:ATTRVAL: span.attrval : !span
+#           Values of the attributes will be surrounded by the
+#           <SPAN class=attrval> </SPAN>
+.ex
+# PRETTYSRC_SPEC:HREF::
+#           No special html markup will surround hyperlink destinations (
+#           this means that only default color style for hrefs will be applied
+#           to them)
+#
+# For lynx compiled with lss support, the following settings are the default:
+#PRETTYSRC_SPEC:COMM:span.htmlsrc_comment:!span
+#PRETTYSRC_SPEC:TAG:span.htmlsrc_tag:!span
+#PRETTYSRC_SPEC:ATTRIB:span.htmlsrc_attrib:!span
+#PRETTYSRC_SPEC:ATTRVAL:span.htmlsrc_attrval:!span
+#PRETTYSRC_SPEC:ABRACKET:span.htmlsrc_abracket:!span
+#PRETTYSRC_SPEC:ENTITY:span.htmlsrc_entity:!span
+#PRETTYSRC_SPEC:HREF:span.htmlsrc_href:!span
+#PRETTYSRC_SPEC:ENTIRE:span.htmlsrc_entire:!span
+#PRETTYSRC_SPEC:BADSEQ:span.htmlsrc_badseq:!span
+#PRETTYSRC_SPEC:BADTAG:span.htmlsrc_badtag:!span
+#PRETTYSRC_SPEC:BADATTR:span.htmlsrc_badattr:!span
+#PRETTYSRC_SPEC:SGMLSPECIAL:span.htmlsrc_sgmlspecial:!span
+# the styles corresponding to them are present in sample .lss file.
+# For lynx compiled without lss support, the following settings are the default:
+#PRETTYSRC_SPEC:COMM:b:!b
+#PRETTYSRC_SPEC:TAG:b:!b
+#PRETTYSRC_SPEC:ATTRIB:b:!b
+#PRETTYSRC_SPEC:ATTRVAL::
+#PRETTYSRC_SPEC:ABRACKET:b:!b
+#PRETTYSRC_SPEC:ENTITY:b:!b
+#PRETTYSRC_SPEC:HREF::
+#PRETTYSRC_SPEC:ENTIRE::
+#PRETTYSRC_SPEC:BADSEQ:b:!b
+#PRETTYSRC_SPEC:BADTAG::
+#PRETTYSRC_SPEC:BADATTR::
+#PRETTYSRC_SPEC:SGMLSPECIAL:b:!b
+
+.h2 HTMLSRC_ATTRNAME_XFORM
+.h2 HTMLSRC_TAGNAME_XFORM
+# Options HTMLSRC_TAGNAME_XFORM and HTMLSRC_ATTRNAME_XFORM control the way the
+# names of tags and names of attributes are transformed correspondingly.
+# Possible values: 0 - lowercase, 1 - leave as is, 2 - uppercase.
+#HTMLSRC_TAGNAME_XFORM:2
+#HTMLSRC_ATTRNAME_XFORM:2
+
+.h2 PRETTYSRC_VIEW_NO_ANCHOR_NUMBERING
+# PRETTYSRC_VIEW_NO_ANCHOR_NUMBERING - pretty source view setting
+# If "keypad mode" in 'O'ptions screen is "Links are numbered" or
+# "Links and form fields are numbered", and PRETTYSRC_VIEW_NO_ANCHOR_NUMBERING is
+# TRUE, then links won't be numbered in psrc view and will be numbered
+# otherwise. Set this setting to TRUE if you prefer numbered links, but wish
+# to get valid HTML source when printing or mailing when in psrc view.
+# Default is FALSE.
+#PRETTYSRC_VIEW_NO_ANCHOR_NUMBERING:FALSE
+
+.h1 HTML Parsing
+
+.h2 FORCE_EMPTY_HREFLESS_A
+# FORCE_EMPTY_HREFLESS_A - HTML parsing
+# This option mirrors command-line option with the same name.  Default is
+# FALSE.  If true, then any 'A' element without HREF will be closed
+# immediately.  This is useful when viewing documentation produced by broken
+# translator that doesn't emit balanced A elements.  If lynx was compiled with
+# color styles, setting this option to TRUE will make lynx screen much more
+# reasonable (otherwise all text will probably have color corresponding to the
+# A element).
+#
+#FORCE_EMPTY_HREFLESS_A:FALSE
+
+.h2 HIDDEN_LINK_MARKER
+# HIDDEN_LINK_MARKER - HTML parsing
+# This option defines the string that will be used as title of hidden link (a
+# link that otherwise will have no label associated with it).  Using an empty
+# string as the value will cause lynx to behave in the old way - hidden links
+# will be handled according to other settings (mostly the parameter of
+# -hiddenlinks command-line switch).  If the value is non-empty string, hidden
+# link becomes non-hidden so it won't be handled as hidden link, e.g., listed
+# among hidden links on 'l'isting page.
+#
+#HIDDEN_LINK_MARKER:
+
+.h2 XHTML_PARSING
+# XHTML_PARSING - HTML parsing
+# When true, tells lynx that it can ignore certain tags which have no content
+# in an XHTML 1.0 document.  For example
+#       <p />
+#       <a />
+# When the option is false, lynx will not treat the tag as an ending.
+#XHTML_PARSING:FALSE
+
+.h1 Appearance
+
+.h2 JUSTIFY
+# JUSTIFY - Appearance
+# This option mirrors command-line option with same name.  Default is TRUE.  If
+# true, most of text (except headers and like this) will be justified.  This
+# has no influence on CJK text rendering.
+#
+# This option is only available if Lynx was compiled with USE_JUSTIFY_ELTS.
+#
+#JUSTIFY:FALSE
+
+.h2 JUSTIFY_MAX_VOID_PERCENT
+# JUSTIFY_MAX_VOID_PERCENT - Appearance
+# This option controls the maximum allowed value for ratio (in percents) of
+# 'the number of spaces to spread across the line to justify it' to
+# 'max line size for current style and nesting' when justification is allowed.
+# When that ratio exceeds the value specified, that particular line won't be
+# justified. I.e. the value 28 for this setting will mean maximum value for
+# that ratio is 0.28.
+#
+#JUSTIFY_MAX_VOID_PERCENT:35
+
+.h1 Interaction
+
+.h2 TEXTFIELDS_NEED_ACTIVATION
+# If TEXTFIELDS_NEED_ACTIVATION is set to TRUE, and lynx was compiled with
+# TEXTFIELDS_MAY_NEED_ACTIVATION defined, then text input form fields need
+# to be activated (by pressing the Enter key or similar) before the user
+# can enter or modify input.  By default, input fields become automatically
+# activated when selected.  Requiring explicit activation can be desired for
+# users who use alphanumeric keys for navigation (or other keys that have
+# special meaning in the line editor - ' ', 'b', INS, DEL, etc), and don't
+# want to 'get stuck' in form fields.  Instead of setting the option here,
+# explicit activation can also be requested with the -tna command line
+# option.
+#
+#TEXTFIELDS_NEED_ACTIVATION:FALSE
+
+.h2 LEFTARROW_IN_TEXTFIELD_PROMPT
+# LEFTARROW_IN_TEXTFIELD_PROMPT
+# This option controls what happens when a Left Arrow key is pressed while
+# in the first position of an active text input field.  By default, Lynx
+# asks for confirmation ("Do you want to go back to the previous document?")
+# only if the contents of the fields have been changed since entering it.
+# If set to TRUE, the confirmation prompt is always issued.
+#
+#LEFTARROW_IN_TEXTFIELD_PROMPT:FALSE
+
+.h1 Timeouts
+
+.h2 CONNECT_TIMEOUT
+# Specifies (in seconds) connect timeout. Default value is rather huge.
+#CONNECT_TIMEOUT:18000
+
+.h2 READ_TIMEOUT
+# Specifies (in seconds) read-timeout. Default value is rather huge.
+#READ_TIMEOUT:18000
+
+.h1 Internal Behavior
+# These settings control internal lynx behavior - the way it interacts with the
+# operating system and Internet.  Modifying these settings will not change
+# the rendition of documents that you browse with lynx, but can change various
+# delays and resource utilization.
+
+.h2 FTP_PASSIVE
+# Set FTP_PASSIVE to TRUE if you want to use passive mode ftp transfers.
+# You might have to do this if you're behind a restrictive firewall.
+#FTP_PASSIVE:TRUE
+
+.h2 ENABLE_LYNXRC
+# The forms-based O'ptions menu shows a (!) marker beside items which are not
+# saved to ~/.lynxrc -- the reason for disabling some of these items is that
+# they are likely to cause confusion if they are read from the .lynxrc file for
+# each session.  However, they can be enabled or disabled using the
+# ENABLE_LYNXRC settings.  The default (compiled-in) settings are shown below.
+# The second column is the name by which a setting is saved to .lynxrc (which
+# is chosen where possible to correspond with lynx.cfg).  Use "OFF" to disable
+# writing a setting, "ON" to enable it.  Settings are read from .lynxrc after
+# the corresponding data from lynx.cfg, so they override lynx.cfg, which is
+# probably what users expect.
+#
+# Note that a few settings (Cookies and Show images) are comprised of more than
+# one lynx.cfg setting.
+.nf
+#ENABLE_LYNXRC:ACCEPT_ALL_COOKIES:ON
+#ENABLE_LYNXRC:ASSUME_CHARSET:OFF
+#ENABLE_LYNXRC:AUTO_SESSION:OFF
+#ENABLE_LYNXRC:BOOKMARK_FILE:ON
+#ENABLE_LYNXRC:CASE_SENSITIVE_SEARCHING:ON
+#ENABLE_LYNXRC:CHARACTER_SET:ON
+#ENABLE_LYNXRC:COLLAPSE_BR_TAGS:ON
+#ENABLE_LYNXRC:COOKIE_ACCEPT_DOMAINS:ON
+#ENABLE_LYNXRC:COOKIE_FILE:ON
+#ENABLE_LYNXRC:COOKIE_LOOSE_INVALID_DOMAINS:ON
+#ENABLE_LYNXRC:COOKIE_QUERY_INVALID_DOMAINS:ON
+#ENABLE_LYNXRC:COOKIE_REJECT_DOMAINS:ON
+#ENABLE_LYNXRC:COOKIE_STRICT_INVALID_DOMAIN:ON
+#ENABLE_LYNXRC:DIR_LIST_STYLE:ON
+#ENABLE_LYNXRC:DISPLAY:OFF
+#ENABLE_LYNXRC:EMACS_KEYS:ON
+#ENABLE_LYNXRC:FILE_EDITOR:ON
+#ENABLE_LYNXRC:FILE_SORTING_METHOD:ON
+#ENABLE_LYNXRC:FORCE_COOKIE_PROMPT:OFF
+#ENABLE_LYNXRC:FORCE_SSL_PROMPT:OFF
+#ENABLE_LYNXRC:FTP_PASSIVE:OFF
+#ENABLE_LYNXRC:HTML5_CHARSETS:OFF
+#ENABLE_LYNXRC:HTTP_PROTOCOL:1.0
+#ENABLE_LYNXRC:IDNA_MODE:TR46
+#ENABLE_LYNXRC:KBLAYOUT:ON
+#ENABLE_LYNXRC:KEYPAD_MODE:ON
+#ENABLE_LYNXRC:LINEEDIT_MODE:ON
+#ENABLE_LYNXRC:LOCALE_CHARSET:ON
+#ENABLE_LYNXRC:MAKE_LINKS_FOR_ALL_IMAGES:OFF
+#ENABLE_LYNXRC:MAKE_PSEUDO_ALTS_FOR_INLINES:OFF
+#ENABLE_LYNXRC:MULTI_BOOKMARK:ON
+#ENABLE_LYNXRC:NO_PAUSE:OFF
+#ENABLE_LYNXRC:PERSONAL_MAIL_ADDRESS:ON
+#ENABLE_LYNXRC:PREFERRED_CHARSET:ON
+#ENABLE_LYNXRC:PREFERRED_ENCODING:OFF
+#ENABLE_LYNXRC:PREFERRED_LANGUAGE:ON
+#ENABLE_LYNXRC:PREFERRED_MEDIA_TYPES:OFF
+#ENABLE_LYNXRC:RAW_MODE:OFF
+#ENABLE_LYNXRC:RUN_ALL_EXECUTION_LINKS:ON
+#ENABLE_LYNXRC:RUN_EXECUTION_LINKS_LOCAL:ON
+#ENABLE_LYNXRC:SCROLLBAR:OFF
+#ENABLE_LYNXRC:SELECT_POPUPS:ON
+#ENABLE_LYNXRC:SEND_USERAGENT:OFF
+#ENABLE_LYNXRC:SESSION_FILE:OFF
+#ENABLE_LYNXRC:SET_COOKIES:OFF
+#ENABLE_LYNXRC:SHOW_CURSOR:ON
+#ENABLE_LYNXRC:SHOW_KB_RATE:OFF
+#ENABLE_LYNXRC:SUB_BOOKMARKS:ON
+#ENABLE_LYNXRC:TAGSOUP:OFF
+#ENABLE_LYNXRC:UNDERLINE_LINKS:OFF
+#ENABLE_LYNXRC:USER_MODE:ON
+#ENABLE_LYNXRC:USERAGENT:OFF
+#ENABLE_LYNXRC:VERBOSE_IMAGES:ON
+#ENABLE_LYNXRC:VI_KEYS:ON
+#ENABLE_LYNXRC:VISITED_LINKS:ON
+.fi
+INCLUDE:/etc/lynx-site.cfg
+
+.h1 External Programs
+# Any of the compiled-in pathnames of external programs can be overridden
+# by specifying the corresponding xxx_PATH variable.  If the variable is
+# given as an empty string, lynx will not use the program.  For a few cases,
+# there are internal functions which can be used instead.
+
+.h2 BZIP2_PATH
+# This is the path used for DIRED mode and web connections to compress a file
+# to ".bz2", e.g., the Unix command "bzip2".
+
+.h2 CHMOD_PATH
+# This is the path used for DIRED mode to change file protection, e.g., the
+# Unix command "chmod".
+#
+# Setting this to an empty string will let lynx use a built-in version.
+
+.h2 COMPRESS_PATH
+# This is the path used for DIRED mode and web connections to compress a file
+# to ".Z", e.g., the Unix command "compress".
+
+.h2 COPY_PATH
+# This is the path used for DIRED mode to copy a file, e.g., the
+# Unix command "cp".
+#
+# Setting this to an empty string will let lynx use a built-in version.
+
+.h2 GZIP_PATH
+# This is the path used for DIRED mode and web connections to compress a file
+# to ".gz", e.g., the Unix command "gzip".
+
+.h2 INFLATE_PATH
+# This is the path used for web connections to compress a file using "inflate"
+# compression.
+
+.h2 INSTALL_PATH
+# This is the path used for DIRED mode to install files, e.g., the
+# Unix command "install".
+
+.h2 MKDIR_PATH
+# This is the path used for DIRED mode to create a directory, e.g., the
+# Unix command "mkdir".
+#
+# Setting this to an empty string will let lynx use a built-in version.
+
+.h2 MV_PATH
+# This is the path used for DIRED mode to move a file, e.g., the
+# Unix command "mv".
+#
+# Setting this to an empty string will let lynx use a built-in version.
+
+.h2 RLOGIN_PATH
+# This is the path used for DIRED mode to login remotely, e.g., the
+# Unix command "rlogin".
+
+.h2 RMDIR_PATH
+# This is the path used for DIRED mode to remove a directory, e.g., the
+# Unix command "rmdir".
+#
+# Setting this to an empty string will let lynx use a built-in version.
+
+.h2 RM_PATH
+# This is the path used for DIRED mode to remove a file, e.g., the
+# Unix command "rm".
+#
+# Setting this to an empty string will let lynx use a built-in version.
+
+.h2 SETFONT_PATH
+# This is the path used for a command which can be used to load a console font
+# for the experimental font-switch feature, e.g., the program "setfont".
+
+.h2 TAR_PATH
+# This is the path used for DIRED mode to create a tar archive from one or more
+# files.
+
+.h2 TELNET_PATH
+# This is the path for a program which can be used to make a "telnet" connection
+# to a remote host.
+
+.h2 TN3270_PATH
+# This is the path for a program which can be used to make an "IBM 3270"
+# connection to a remote host.
+
+.h2 TOUCH_PATH
+# This is the path used for DIRED mode to update the modification time of a
+# file to the current time,, e.g., the Unix command "touch".
+#
+# Setting this to an empty string will let lynx use a built-in version.
+
+.h2 UNCOMPRESS_PATH
+# This is the path used for DIRED mode and web connections to decompress a file
+# with ".Z" suffix, e.g., the Unix command "uncompress".
+
+.h2 UNZIP_PATH
+# This is the path used for DIRED mode to extract files from a zip-archive the
+# program "unzip".
+
+.h2 UUDECODE_PATH
+# This is the path used for DIRED mode to extract files from uuencoded files
+# e.g., the program "uudecode".
+
+.h2 ZCAT_PATH
+# This is the path used for DIRED mode to decompress files, writing the result
+# to a pipe as part of a shell command, e.g., the program "zcat".
+
+.h2 ZIP_PATH
+# This is the path used for DIRED mode to create a zip-archive from one or more
+# files, e.g., the program "unzip".
+
+.h1 Interaction
+
+.h2 FORCE_SSL_PROMPT
+# If FORCE_SSL_PROMPT is set to "yes", then questionable conditions, such as
+# self-signed certificates will be ignored.  If set to "no", these will be
+# reported, but not attempted.  The default "prompt" permits the user to make
+# this choice on a case-by-case basis.
+#
+#FORCE_SSL_PROMPT:PROMPT
+
+.h2 FORCE_COOKIE_PROMPT
+# If FORCE_COOKIE_PROMPT is set to "yes", then questionable conditions, such as
+# cookies with invalid syntax will be ignored.  If set to "no", these will be
+# reported, but not attempted.  The default "prompt" permits the user to make
+# this choice on a case-by-case basis.
+#
+#FORCE_COOKIE_PROMPT:PROMPT
+
+.h2 SSL_CERT_FILE
+# Set SSL_CERT_FILE to the file that contains all valid CA certificates lynx
+# should accept, in case the $SSL_CERT_FILE environment variable is not set,
+# e.g.,
+#
+#SSL_CERT_FILE:/etc/ssl/certs/ca-certificates.crt
+#SSL_CERT_FILE:NULL
+
+.h2 SSL_CLIENT_CERT_FILE
+# Set SSL_CLIENT_CERT_FILE to the file that contains a client certificate
+# (in PEM format) in case the $SSL_CLIENT_CERT_FILE environment variable is
+# not set, e.g.,
+#
+#SSL_CLIENT_CERT_FILE:/home/qux/certs/cert.crt
+#SSL_CLIENT_CERT_FILE:NULL
+
+.h2 SSL_CLIENT_KEY_FILE
+# Set SSL_CLIENT_KEY_FILE to the file that contains a client certificate
+# key (in PEM format), in case the $SSL_CLIENT_KEY_FILE environment variable
+# is not set, e.g.,
+#
+#SSL_CLIENT_KEY_FILE:/home/qux/certs/cert.key
+#SSL_CLIENT_KEY_FILE:NULL
+
+.h1 Appearance
+
+.h2 SCREEN_SIZE
+# For win32, allow the console window to be resized to the given values.  This
+# requires PDCurses 2.5.  The values given are width,height.
+#SCREEN_SIZE:80,24
+
+.h2 NO_MARGINS
+# Disable left/right margins in the default style sheet.
+# This is the same as the command-line "-nomargins" option.
+#NO_MARGINS:FALSE
+
+.h2 NO_TITLE
+# Disable title and blank line from top of page.
+# This is the same as the command-line "-notitle" option.
+#NO_TITLE:FALSE
+
+.h2 UPDATE_TERM_TITLE
+# Enables updating the title in terminal emulators.
+# If your terminal emulator supports that escape code,
+# you can set this to TRUE.
+# This is the same as the command-line "-update_term_title" option.
+#UPDATE_TERM_TITLE:FALSE
+
+.h1 External Programs
+
+.h2 SYSLOG_REQUESTED_URLS
+# Log the requested URLs using the syslog interface.
+#SYSLOG_REQUESTED_URLS:TRUE
+
+.h2 SYSLOG_TEXT
+# Add the given text to calls made to syslog, to distinguish Lynx from other
+# applications which use that interface.
+#SYSLOG_TEXT:
+
+.h1 Internal Behavior
+.h2 BROKEN_FTP_RETR
+# Some ftp servers are known to have a broken implementation of RETR.  If asked
+# to retrieve a directory, they get confused and fails subsequent commands such
+# as CWD and LIST.  Workaround: reconnect after a failed RETR, which is slow.
+#
+# Each BROKEN_FTP_RETR gives a string match for the reported FTP server version
+#BROKEN_FTP_RETR:ProFTPD 1.2.5
+#BROKEN_FTP_RETR:spftp/
+
+.h2 BROKEN_FTP_EPSV
+# Some ftp servers are known to have a broken implementation of EPSV.  The
+# server will hang for a long time when we attempt to connect after issuing
+# this command.   Workaround: do not use EPSV, just use PASV.
+#
+# Each BROKEN_FTP_EPSV gives a string match for the reported FTP server version
+#BROKEN_FTP_EPSV:(Version wu-2.6.2-12)
+
+.h1 Appearance
+.h2 FTP_FORMAT
+# FTP_FORMAT defines the display for remote files.
+# It uses the same "%" codes as LIST_FORMAT.
+#FTP_FORMAT:%d  %-16.16t %a  %K
+
+.h1 Internal Behavior
+
+.h2 STATUS_BUFFER_SIZE
+# STATUS_BUFFER_SIZE controls the size of the buffer used for the LYNXMESSAGES
+# special url.
+#
+# The default size is 40.
+#STATUS_BUFFER_SIZE:40
+
+.h2 MAX_URI_SIZE
+# MAX_URI_SIZE controls the size of the buffer used for parsing URIs, e.g., the
+# HREF value in an anchor.
+#
+# The default size is 8192.
+#MAX_URI_SIZE:8192
+
+.h1 Appearance
+.h2 UNIQUE_URLS
+# UNIQUE_URLS can be set to tell Lynx to check for duplicate link numbers in
+# the page and corresponding lists, and reusing the original link number.
+# This can be set via command-line "-unique-urls".
+#UNIQUE_URLS:FALSE
+
+.h1 Character Sets
+.h2 MESSAGE_LANGUAGE
+# MESSAGE_LANGUAGE can be set to set the LANG environment variable explicitly.
+# This is mainly useful in non-Unix environments, e.g., Windows, since normally
+# LC_ALL is set, overriding LANG (as well as the more apt LC_MESSAGES variable).
+#MESSAGE_LANGUAGE:
+
+.h2 CONV_JISX0201KANA
+# If CONV_JISX0201KANA is set, Lynx will convert JIS X0201 Kana to JIS X0208
+# Kana, i.e., convert half-width kana to full-width.
+#CONV_JISX0201KANA:TRUE
+
+.h1 External Programs
+.h2 WAIT_VIEWER_TERMINATION
+# The WAIT_VIEWER_TERMINATION is used in the Windows environment to tell Lynx
+# to wait until a viewer has terminated.
+#WAIT_VIEWER_TERMINATION:FALSE
+
+.h1 Mail-related
+.h2 BLAT_MAIL
+# BLAT_MAIL is used in the Win32 port.  It tells Lynx whether to use the
+# "blat" mailer, or the "sendmail" utility.  Normally the "blat" mailer is
+# used for Win32, because the sendmail look-alikes have fewer features.
+# This feature can also be set/reset via the command-line "-noblat" option.
+#
+# Blat is available from
+.url http://www.blat.net
+#
+# See also ALT_BLAT_MAIL and SYSTEM_MAIL flags.
+#BLAT_MAIL:TRUE
+
+.h2 ALT_BLAT_MAIL
+# BLAT_MAIL is used in the Win32 port.  It tells Lynx whether to use the
+# "blat" mailer, or the "blatj" utility.  This feature can also be set/reset
+# via the command-line "-altblat" option.
+#
+# Some users prefer blatj, which can handle Japanese characters.  It is
+# available from
+.url http://www.piedey.co.jp/blatj/
+# (caution - the page is in Japanese).
+#
+# See also BLAT_MAIL and SYSTEM_MAIL flags.
+#ALT_BLAT_MAIL:FALSE
+
+.h1 Internal Behavior
+.h2 TRACK_INTERNAL_LINKS
+# With `internal links' (links within a document to a location within the same
+# document) enabled, Lynx will distinguish between, for example, `<A
+# HREF="foo#frag">' and `<A HREF="#frag">' within a document whose URL is
+# `foo'.  It may handle such links differently, although practical differences
+# would appear only if the document containing them resulted from a POST
+# request or had a no-cache flag set.  This feature attempts to interpret
+# URL-references as suggested by RFC 2396, and to prevent mistaken
+# resubmissions of form content with the POST method.  An alternate opinion
+# asserts that the feature could actually result in inappropriate resubmission
+# of form content.
+#TRACK_INTERNAL_LINKS:FALSE
+
+.h1 HTML Parsing
+
+.h2 DONT_WRAP_PRE
+# Inhibit wrapping of text when  -dump'ing  and  -crawl'ing,  mark
+# wrapped lines of <pre> in interactive session.
+#DONT_WRAP_PRE:FALSE
+
+.h2 FORCE_HTML
+# When true, this forces the first document specified on the command-line
+# to be interpreted as HTML.
+#FORCE_HTML:FALSE
+
+.h2 HIDDENLINKS
+# Control the display of hidden links, using one of the following names:
+#
+# MERGE
+#  hidden links show up as bracketed numbers  and  are  numbered
+#  together with other links in the sequence of their occurrence
+#  in the document.
+#
+# LISTONLY
+#  hidden links are shown only on  L)ist  screens  and  listings
+#  generated  by  -dump  or  from  the  P)rint  menu, but appear
+#  separately at the end of those lists.  This  is  the  default
+#  behavior.
+#
+# IGNORE
+#  hidden links do not appear even in listings.
+#
+#HIDDENLINKS:LISTONLY
+
+.h1 Appearance
+.h2 SHORT_URL
+# If true, show very long URLs in the status line with "..." to represent the
+# portion which cannot be displayed.  The beginning and end of the URL are
+# displayed, rather than suppressing the end.
+#SHORT_URL:FALSE
+
+.h1 Dump/Crawl
+.h2 LISTONLY
+# For -dump, show only the list of links.
+#LISTONLY:FALSE
+
+.h2 LIST_INLINE
+# For -dump, show the links inline with the text.
+#LIST_INLINE:FALSE
+
+.h2 LOCALHOST
+# When true, this disables URLs that point to remote hosts.
+#LOCALHOST:FALSE
+
+.h2 WITH_BACKSPACES
+# Emit backspaces in output if -dump'ing or -crawl'ing (like 'man' does).
+#WITH_BACKSPACES:FALSE
+
+.h1 Internal Behavior
+.h2 HTTP_PROTOCOL
+# Normally Lynx negotiates HTTP/1.0, because it does not support chunked
+# transfer (a requirement for all HTTP/1.1 clients), although it supports
+# several other features of HTTP/1.1.  You may encounter a server which does
+# not support HTTP/1.0 which can be used by switching to the later protocol.
+#HTTP_PROTOCOL:1.0
+
+.h2 GUESS_SCHEME
+# When true, Lynx may fill in a missing "scheme" for URIs which you provide.
+# This is different from URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES.
+#
+# If no "scheme" (such as "http:", "ftp:") is given in a URI, Lynx first checks
+# if there is a corresponding local file which can be accessed directly. 
+# Failing that, Lynx may inspect the URI to see if it begins with a prefix
+# which implies a scheme.
+#
+# Lynx uses these schemes for the corresponding prefixes:
+#
+# cso:
+#  "cso."
+#  "ns."
+#  "ph."
+# ftp:
+#  "ftp."
+# gopher:
+#  "gopher."
+# http:
+#  "www".
+# news:
+#   "news."
+# nntp:
+#   "nntp."
+# wais:
+#  "wais."
+#
+# The default value FALSE disables this guess, telling Lynx to just assume that
+# "http:" was intended.
+#GUESS_SCHEME:FALSE
+
+.h2 REDIRECTION_LIMIT
+# HTTP 1.0 suggested a redirection-limit of 5; lynx doubled that.  Some users
+# believe they can improve their experience with a higher limit.
+#REDIRECTION_LIMIT:10
+
+.h1 Appearance
+.h2 LIST_DECODED
+# For -dump, show URL-encoded links decoded.
+#LIST_DECODED:TRUE
diff --git a/.config/lynx/lynx.lss b/.config/lynx/lynx.lss
new file mode 100644
index 0000000..2d02eb1
--- /dev/null
+++ b/.config/lynx/lynx.lss
@@ -0,0 +1,115 @@
+# Setting the normal and default types lets us keep (almost) the same colors
+# whether the terminal's default colors are white-on-black or black-on-white.
+# It is not exact since the default "white" is not necessarily the same color
+# as the ANSI lightgray, but is as close as we can get in a standard way.
+#
+# If you really want the terminal's default colors, and if lynx is built using
+# ncurses' default-color support, remove these two lines:
+normal:         normal:                 lightgray:black
+default:        normal:                 white:black
+
+# Normal type styles correspond to HTML tags.
+#
+# The next line (beginning with "em") means:  use bold if mono, otherwise
+# brightblue on <defaultbackground>
+em:             bold:                   brightblue
+strong:         bold:                   brightred
+b:              bold:                   red
+i:              bold:                   brightblue
+a:              bold:                   green
+img:            dim:                    brown
+fig:            normal:                 gray
+caption:        reverse:                brown
+hr:             normal:                 yellow
+blockquote:     normal:                 brightblue
+ul:             normal:                 brown
+address:        normal:                 magenta
+title:          normal:                 magenta
+tt:             dim:                    brightmagenta:  black
+h1:             bold:                   yellow:         blue
+label:          normal:                 magenta
+q:              normal:                 yellow:         magenta
+small:          dim:                    default
+big:            bold:                   yellow
+sup:            bold:                   yellow
+sub:            dim:                    gray
+li:             normal:                 magenta
+code:           normal:                 cyan
+cite:           normal:                 cyan
+
+table:          normal:                 brightcyan
+tr:             bold:                   brown
+td:             normal:                 default
+br:             normal:                 default
+
+# Special styles - not corresponding directly to HTML tags
+#       alert   - status bar, when message begins "Alert".
+#       alink   - active link
+#       normal  - default attributes
+#       status  - status bar
+#       whereis - whereis search target
+#
+#normal:normal:default:blue
+alink:          reverse:                yellow:         black
+status:         reverse:                yellow:         blue
+alert:          bold:                   yellow:         red
+whereis:        reverse+underline:      magenta:        cyan
+# currently not used
+#value:normal:green
+
+menu.bg:        normal:                 black:          lightgray
+menu.frame:     normal:                 black:          lightgray
+menu.entry:     normal:                 lightgray:      black
+menu.n:         normal:                 red:            gray
+menu.active:    normal:                 yellow:         black
+menu.sb:        normal:                 brightred:      lightgray
+
+forwbackw.arrow:reverse
+hot.paste:      normal:                 brightred:      gray
+
+# Styles with classes - <ul class=red> etc.
+ul.red:         underline:              brightred
+ul.blue:        bold:                   brightblue
+li.red:         reverse:                red:            yellow
+li.blue:        bold:                   blue
+strong.a:       bold:                   black:          red
+em.a:           reverse:                black:          blue
+strong.b:       bold:                   white:          red
+em.b:           reverse:                white:          blue
+strong.debug:   reverse:                green
+font.letter:    normal:                 white:          blue
+input.submit:   normal:                 cyan
+tr.baone:       bold:                   yellow
+tr.batwo:       bold:                   green
+tr.bathree:     bold:                   red
+#
+# Special handling for link.
+link:           normal:                 white
+link.green:     bold:                   brightgreen
+link.red:       bold:                   black:          red
+link.blue:      bold:                   white:          blue
+link.toc:       bold:                   black:          white
+# Special cases for link - the rel or title is appended after the class.
+# <link rel=next class=red href="1">
+link.red.next:  bold:                   red
+link.red.prev:  bold:                   yellow:         red
+link.blue.prev: bold:                   yellow:         blue
+link.blue.next: bold:                   blue
+link.green.toc: bold:                   white:          green
+#
+# Define styles that will be used when syntax highlighting is requested
+# (commandline option -prettysrc). 
+span.htmlsrc_comment:normal:            white
+span.htmlsrc_tag:normal:                white
+#If you don't like that the tag name and attribute name are displayed 
+#in different colors, comment the following line. 
+span.htmlsrc_attrib:normal:             cyan
+span.htmlsrc_attrval:normal:            magenta
+span.htmlsrc_abracket:normal:           white
+span.htmlsrc_entity:normal:             white
+##span.htmlsrc_href:
+##span.htmlsrc_entire:
+span.htmlsrc_badseq:normal:             red
+span.htmlsrc_badtag:normal:             red
+span.htmlsrc_badattr:normal:            red
+span.htmlsrc_sgmlspecial:normal:        yellow
diff --git a/.config/msmtp/config b/.config/msmtp/config
new file mode 100644
index 0000000..9426fd1
--- /dev/null
+++ b/.config/msmtp/config
@@ -0,0 +1,11 @@
+account mailbox.org
+host smtp.mailbox.org
+port 465
+tls on
+tls_starttls off
+auth on
+user sebastiano@tronto.net
+passwordeval cat ~/.ssh/mailbox.org
+from sebastiano@tronto.net
+
+account default: mailbox.org
diff --git a/.config/zathura/zathurarc b/.config/zathura/zathurarc
new file mode 100644
index 0000000..e2423d4
--- /dev/null
+++ b/.config/zathura/zathurarc
@@ -0,0 +1,29 @@
+#set guioptions               ""
+
+set font                     "monospace normal 12"
+
+set completion-bg            "#282828"
+set completion-fg            "#f9f9f9"
+set completion-group-bg      "#141414"
+set completion-group-fg      "#3465a4"
+set completion-highlight-bg  "#48b9c7"
+set completion-highlight-fg  "#282828"
+
+set default-bg               "#282828"
+set default-fg               "#f9f9f9"
+set statusbar-bg             "#282828"
+set statusbar-fg             "#f9f9f9"
+
+set inputbar-bg              "#141414" 
+set inputbar-fg              "#4e9a06"
+
+set notification-bg          "#282828"
+set notification-fg          "#f9f9f9"
+set notification-warning-bg  "#282828"
+set notification-warning-fg  "#c4a000"
+set notification-error-bg    "#282828"
+set notification-error-fg    "#cc0000"
+
+#set recolor true
+set recolor-darkcolor        "#141414"
+set recolor-lightcolor       "#f9f5d7"
diff --git a/.config/zathura/zathurarc-gruvbox b/.config/zathura/zathurarc-gruvbox
new file mode 100644
index 0000000..d1aed9e
--- /dev/null
+++ b/.config/zathura/zathurarc-gruvbox
@@ -0,0 +1,29 @@
+#set guioptions               ""
+
+set font                     "monospace normal 12"
+
+set completion-bg            "#282828"
+set completion-fg            "#fbf1c7"
+set completion-group-bg      "#1d2021"
+set completion-group-fg      "#458588"
+set completion-highlight-bg  "#83a598"
+set completion-highlight-fg  "#282828"
+
+set default-bg               "#282828"
+set default-fg               "#fbf1c7"
+set statusbar-bg             "#282828"
+set statusbar-fg             "#fbf1c7"
+
+set inputbar-bg              "#1d2021" 
+set inputbar-fg              "#98971a"
+
+set notification-bg          "#282828"
+set notification-fg          "#fbf1c7"
+set notification-warning-bg  "#282828"
+set notification-warning-fg  "#d79921"
+set notification-error-bg    "#282828"
+set notification-error-fg    "#cc241d"
+
+#set recolor true
+set recolor-darkcolor        "#1d2021"
+set recolor-lightcolor       "#f9f5d7"